Pullers & Separators

Automotive

stockStatus

brand

categoryId

Product Type

Capacity (mm)

Reach (mm)

Jaw Reach (mm)

Number of Legs

Maximum Jaw Opening (mm)

Automotive Tools

Pullers

Kennedy

Contents: 1 x hydraulic ram. 3 x 4", 6" & 8" puller legs. 1 x twin head. 1 x triple head. 1 x 50mm ram extension. 1 x 100mm ram extension. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x 75 - 105mm separator. 1 x bolt. 1 x ram ring. 1 x ram nut. Blow moulded storage case

This hand-operated hydraulic puller and separator set from Kennedy® is manufactured from high-quality material to provide excellent performance in automotive repair settings. The twenty-five-piece set with an industrial strength ten-tonne capacity provides everything the operator should need to get the job done.

Features and Benefits
• Tough, impact-resistant construction 
• Durable carry case included 
• Industrial strength kit 

Contents 
• 1x hydraulic ram (1-1/2in. dia.)
• 3x 4in. puller legs
• 3x 6in. puller legs
• 3x 8in. puller legs
• 2x 230mm extension rods
• 1x 25.4mm x 50.8mm extension rod
• 1x 25.4mm x 101.6mm extension rod
• 2x 200mm main rods
• 1x ram ring
• 1x separator (20mm-105mm)
• 1x beam
• 1x twin head
• 1x triple head
• 1x ram nut
• 1x centre adapter 
• 1x bolt
• 1x storage case

Typical Applications
• Agricultural machines
• Garage 
• Industrial use

Hydraulic Puller/ Separator Set

HYDRAULIC PULLER SET (25-PCE)

Fully hardened & chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.

3 Jaw Internal & External Multi-function Slide Hammer Puller Set.
Slide hammer design for removing bearings from blind housings. 

Features and Benefits
• Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight
• The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar
• The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position
• Durable blow moulded case

Typical Applications
• Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. 

Contents
• 6 Piece Set Contents: 1x T-bar. 1x hammer 1.2kg. 1x 3 jaw internal puller 15 - 30mm. 1x 3 jaw internal puller 30 - 80mm. 1x 3 jaw external puller 15 - 80mm. 1x blow moulded case

Slide Hammer Puller Set

INTERNAL & EXTERNAL PULLER KIT

Contents: 1 x combination head. 1 x hydraulic ram. 3 x 3 position puller legs. 6 x leg connectors. 6 x screw nuts, bolts & washers. 1 x 32mm ext. rod. 1 x ram nut. 1 x blow moulded storage case.

10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. 

Features and Benefits
• Highly versatile - can be used as a two or three legged puller with the same head
• Generous 10 ton capacity for excellent performance 
• Supplied with storage case to keep kit safe, secure and tidy

Contents 
• 1x combination head
• 1x hydraulic ram
• 3x three position puller legs
• 6x leg connectors
• 6x screw nuts, bolts and washers
• 1x 32mm extension rod


6-Way Hydraulic Puller Set, 18-Piece

10 Ton Hydraulic Ram Puller Set

10 tonne capacity grease filled hydraulic ram with spring loaded plunger. Provides direct non-twisting application of thrust that is more effective and secure than a mechanical thrust screw. Fully threaded body allows for quick and easy height adjustment. With tommy bar.

Fits most brands of pullers and ball joint separators including Kennedy, Sykes-Pickavant, Sealey, Draper, Bergen, Clarke etc.
Capacity: 10 tonne.
Length excluding handle: 190mm. 
Diameter of ram: 40mm. 
Thread pitch: 16 gauge x 3/8 BSW

10 ton capacity grease filled hydraulic ram with spring loaded plunger. Provides direct non-twisting application of thrust. Fully threaded body allows for quick and easy height adjustment. With tommy bar.

Features and Benefits
• Fits most brands of pullers and ball joint separators including Kennedy, Sykes-Pickavant, Sealey, Draper, Bergen, Clarke etc.
• More effective and secure than a mechanical thrust screw

Technical Information
• Capacity: 10 ton
• Length excluding handle: 190mm
• Diameter of ram: 38mm
• Thread pitch: 16 gauge x 3/8 BSW

10 Ton Hydraulic Ram

10- TON HYDRAULIC RAM

Laser Tools

The Internal Bearing Puller Set from Laser Tools® is ideal for the extraction of bearings that require removal by pulling as opposed to pressing.

Features and Benefits
• Supplied with a range of adapter sizes for versatile application
• Suitable for use on blind mounted bearings

Contents
• Adapters (8mm, 10mm x 100mm, 12mm, 15mm, 17mm x 60mm, 20mm x 95mm, 25mm, 30mm, 32mm x 60mm)
• Chrome plated slide hammer (300mm working shaft)
• Space collar
• Tapered bolt

Typical Applications
• Motorcycle wheel bearing extraction
• Blind mounted bearings


Internal Bearing Puller Set

INTERNAL BEARING PULLER SET

Sykes-Pickavant

Manufactured from forged steel, with thin jaws for access where the clearance behind the component is limited.
086000 
Spread: 75mm. Reach: 75mm.
086100
Spread: 150mm. Reach: 150mm.
086200
Spread: 150mm. Reach: 225mm.

Thin/2 Jaw Mechanical Pullers

086000 TWIN LEG THIN JAW PULLER

Separators & Coil Spring Compressors

Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied. Can be upgraded to hydraulic power (use Sykes Pickavant 08075000 Upgrade Kit)
Throat depth: 50mm.
Throat width: 36mm.

A tough ball joint separator that can be upgraded to hydraulic power (using Sykes Pickavant 08075000 Upgrade Kit)

Features and Benefits
• Strong, heavy duty body
• Strengthened fork and lever
• Can be upgraded to hydraulic power

Notes
• Throat depth: 50mm
• Throat width: 36mm

Ball Joint Separator - HGV

080700 BALL JOINT SEPARATOR

For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. 
Jaw hardness: 42° - 45° HRC.

This range of bearing separators are ideal for removing bearings, gears and bushes from shafts, particularly where access with a mechanical puller is restricted. They have tapered edges for insertion behind close fitting bearings, gears and bushes. 

Features and Benefits
• Jaw hardness: 42° - 45° HRC
• Tapered edges

Typical Applications
• Removing bearings, gears and bushes from shafts

Bearing Separators

150mm BEARING SEPARATOR

105mm BEARING SEPARATOR

Mechanical pullers that are ideal for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. 

Features and Benefits
• All sizes have double-ended, adjustable and reversible legs

Typical Applications
• Internal and external tasks

Double Ended Mechanical Pullers

Double Ended Mechanical Puller, 6" 3-Jaw

Fully hardened & chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.Functions:2 Jaw internal or external puller. 3 jaw internal or external puller.Hub puller.Dent puller.Lip or edge puller.Grip Wrench Puller.

Designed to quickly remove bearings from blind housings, the slide hammer puller set from Kennedy® is strong and durable. This multi-function tool set is constructed from fully hardened, chrome carbon steel for exceptional value for money and a long service life.

Features and Benefits
• Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against
• The bearing is easily removed by the impact action of the slide hammer weight hitting the stop at the end of the bar
• The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position
• Supplied with a storage case for highly portable and organised tools

Contents
• 1x T-bar
• 1x hammer
• 1x two jaw head
• 1x three jaw head
• 1x leg locking nut
• 1x grip wrench adaptor
• 1x tapping adaptor and hook
• 2x axle pullers
• 3x 120mm puller legs
• 3x screw and nut assemblies
• 1x blow moulded storage case

Slide Hammer Bearing Puller, 16 Piece Set

Double Ended Mechanical Puller, 4" 3-Jaw

This comprehensive 24 piece set makes 6 different twin/triple leg pullers, plus a bearing separator kit. Supplied in a metal case for safe keeping and easy transportation.

Features and Benefits
• Makes 6 different twin/triple leg pullers, plus a bearing separator kit
• Comprehensive 24 piece set for a broad application
• Supplied in a metal case to keep your kit safe

Contents
• 15282800 3 x Legs - 200mm
• 19311200 1 x Twin Beam
• 15000000 1 x Hydraulic Ram With Nose Piece
• 15241200 1 x Twin Head
• 15341300 1 x Triple Head
• 15242200 1 x Ram Extension - 50mm
• 15262400 1 x Ram Extension - 100mm
• 15242400 3 x Legs - 100mm
• 15262600 3 x Legs - 150mm
• 09510000 1 x Separator 20-105mm
• 09311500 2 x Main Rods
• 09311900 4 x Extension Rods
• 09312300 2 x Extension Rods 5 inch

Typical Applications
• Automotive

Hydraulic Puller and Separator Kit, 24 Pieces

155208 HYDRAULIC PULLER & SEPARATOR KIT

Double Ended Mechanical Puller, 3" 3-Jaw

Double Ended Mechanical Puller, 8" 3-Jaw

Double Ended Mechanical Puller, 3" 2-Jaw

The jaws are manufactured from drop-forged steel with independent leaf springs for positive location. Suitable for the rapid removal of small bearings. Spread: 19 - 45mm.Reach: 73mm.

Have a simple, grease filled ram instead of the mechanical force screw. This produces more power easily and efficiently. The spring loaded plunger provides direct, non-twisting application of thrust safely.

Hydraulic Micro Puller - 3 Jaw
The jaws are manufactured from drop-forged steel with independent leaf springs for positive location. Suitable for the rapid removal of small bearings. 
Spread: 19 - 45mm. Reach: 73mm.

Hydraulic Puller

082150 MICRO PULLER

This 3 piece hydraulic ram set contains a standard power unit for SP suspension products that is 50% more powerful than the original SP1500 Series 8 tonne ram, creating reliable power for tough applications. The product can achieve up to 4 tonnes of mechanical force prior to hydraulic operation.

Features and Benefits
• 50% more powerful than the original SP1500 Series 8 tonne ram, creating reliable power for tough applications
• Can achieve up to 4 tonnes of mechanical force prior to hydraulic operation
• Includes a 2in. extension and a foam cut out for storage

Contents
• Storage Foam
• Hydraulic Ram
• Ram Nose Piece
• 2in. Extension

Typical Applications
• Automotive

1800 Series Hydraulic Ram Set, 12 Tonne, 3 Pieces

180000V2 1800 SERIES 12T HYDRAULIC RAM

Manufactured from drop forged hardened alloy steel. 3 position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the t-bar to extend the thrust bolt on to fixed shaft.
Spread: 10 - 50mm
Reach: 300mm

Reversible
Manufactured from drop forged hardened alloy steel. Three position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the T-bar to extend the thrust bolt on to fixed shaft. 
Spread: 10 - 50mm.
Reach: 300mm.

Long Reach Mechanical Puller - 2 Jaw

LONG JAW MECHANICAL PULLER

Bearing separator with two interchangeable thin jaw puller legs. Puller has a 75mm spread and reach. The separator has a maximum diameter of 55mm and a reach of 115mm.

093005 mechanical thin jaw gear puller kits provide extensive versatility and are available in many configurations including twin and triple leg and with bearing separators.

Pulling unit with small capacity separator and thin jaw legs to remove bearings inaccessible to standard puller jaws. 
Supplied in carton
Puller Reach Max: 75mm
Puller Spread: 0 - 75mm Max
External Spread Max: 55mm
   





Mechanical Puller & Separator Kit - Thin Jaw 75mm 

093005 BEARING PULLER SET

086100 TWIN LEG THIN JAW PULLER

09311500 - Main Pulling Rod 254mm long (1/2" x 16BSF)

Weight - 0.55
Dim 1 - 290
Dim 2 - 110
Dim 3 - 20

Main Rod Assembly for Hydraulic/Mechanical Pullers

093115 MAIN ROD ASSEMBLY

Both sets contain: 1 x hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. HS7 (only) also contains 1x 80mm push plate 1x 50mm ram extension. 1x 100mm ram extension.

These hydraulic bearing separators are ideal for removing bearings, gears, sprockets and bushes. They feature a 10 tonne capacity hydraulic ram with tommy bar. The sets come in a metal storage case and feature an array of accessories, listed below.

Features and Benefits
• Durable, long-life tools
• Packaged in a durable metal storage case
• 10 tonne capacity hydraulic ram

Both sets contain:

• 1x hydraulic ram
• 1x separator
• 2x 200mm main rods
• 2x 230mm extension rods
• 1x beam
• 1x ram nut

HS7 (only) also contains 
• 1x 80mm push plate
• 1x 50mm ram extension
• 1 x 100mm ram extension


Hydraulic Separator Sets

HYDRAULIC BEARING SEPARATOR SET 105-150mm

This 1/2in. female to M8 male converter is a useful consumable part for mechanical pullers and kits. 

Features and Benefits
• Versatile component can be used on puller legs and when forcing screws when pulling

Typical Applications
• Fitting smaller split collet extractors (between 6.5mm to 30mm)

095820 1/2in. Female to M8 Male Converter

095820 ADAPTOR

Contents: 1 x 7" thrust bolt. 1 x 30-50mm separator. 1 x 50-75mm separator. 2 x 80 & 100mm main rods. 2 x 90 & 110mm. extension rods. 1 x beam.

30 - 75mm 
For removing bearings, gears, sprockets and bushes. Metal storage case.
Contents:
1x 7” thrust bolt.
1x 30 - 50mm separator.
1x 50 - 75mm separator.
2x 80 and 100mm main rods.
2x 90 and 110mm extension rods.
1x beam.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Pullers & Separators

Kennedy

HYDRAULIC PULLER SET (25-PCE)

Kennedy

INTERNAL & EXTERNAL PULLER KIT

Kennedy

10 Ton Hydraulic Ram Puller Set

Kennedy

10- TON HYDRAULIC RAM

Laser Tools

INTERNAL BEARING PULLER SET

Sykes-Pickavant

086000 TWIN LEG THIN JAW PULLER

2 Variations

Sykes-Pickavant

080700 BALL JOINT SEPARATOR

Kennedy

150mm BEARING SEPARATOR

4 Variations

Kennedy

105mm BEARING SEPARATOR

4 Variations

Kennedy

Double Ended Mechanical Puller, 6" 3-Jaw

12 Variations

Kennedy

Slide Hammer Bearing Puller, 16 Piece Set

Kennedy

Double Ended Mechanical Puller, 4" 3-Jaw

12 Variations

Sykes-Pickavant

155208 HYDRAULIC PULLER & SEPARATOR KIT

Kennedy

Double Ended Mechanical Puller, 3" 3-Jaw

12 Variations

Kennedy

Double Ended Mechanical Puller, 8" 3-Jaw

12 Variations

Kennedy

Double Ended Mechanical Puller, 3" 2-Jaw

12 Variations

Sykes-Pickavant

082150 MICRO PULLER

Sykes-Pickavant

180000V2 1800 SERIES 12T HYDRAULIC RAM

Kennedy

LONG JAW MECHANICAL PULLER

Sykes-Pickavant

093005 BEARING PULLER SET

Sykes-Pickavant

086100 TWIN LEG THIN JAW PULLER

2 Variations

Sykes-Pickavant

093115 MAIN ROD ASSEMBLY

Kennedy

HYDRAULIC BEARING SEPARATOR SET 105-150mm

2 Variations

Sykes-Pickavant

095820 ADAPTOR

Kennedy

MECHANICAL BEARING SEPARATOR SET 30-75mm

Key Information

Policies

© 2024 Cromwell. All rights reserved.