Wedge Belts

Bearings & Transmissions

stockStatus

brand

categoryId

Belt Section

Belt Width (mm)

Belt Type

Drive Belts

Dunlop BTL

WEDGE BELTS are developed for high performance, length stability, antistatic properties and resistance to oil and heat. 

Particularly suitable for centrifugal pumps, compressors, motor generators, Fan Motors etc. They offer a good balance between price, performance and quality. 

They represent an affordable solution for transmission systems in all industrial sectors.

Features:
• Antistatic properties to ISO 1813.
• Easy Installation.
• Highly Efficient.
• Low Maintenance.
• Resistant to Oil and Heat.
• Silent Operation.
• Smooth Starting and Running.
• Working Temperature Range -30°C to + 80°C.

Wedge belts are produced to BS3790, DIN 7753, ISO 1813 standards. 

IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION



Standard Wrapped Wedge Belts - SPZ (9.7mm x 8mm)

SPZ3350 Standard Wrapped Wedge Belts (9.7 x 3350Lp)

SPZ3550 Standard Wrapped Wedge Belts (9.7 x 3550Lp)

Raw edge cogged wedge belts are high performance and are designated by letters standing for their cross-section, e.g. SPAX followed by a number e.g. 1600 which specifies the belts pitch length Lp in mm. They enable resistance to repeated flexing, compact drives, reduced weight, cost savings, small pulley diameters and high drive ratios. They are manufactured in the cross-sections 
SPZX, SPAX, SPBX and SPCX in a range of over 300 lengths and are static conductive to ISO1813.

Belt Section XPZ (SPZX)

Moulded Cog or Raw-edge V-belts have higher capacity and efficiency and they use smaller pulleys than traditional envelope (wrapped) belts. These belts have a higher coefficient of friction and are more aggressive, which makes them a very efficient belt for power transmission Unlike conventional fabric-covered V-belts, raw-edge belts have no cover. Thus, the cross-sectional area normally occupied by the cover is used for more load-carrying cord. Cogs on the inner surface of the belt increase air flow to enhance cooler running. They also increase flexibility, allowing the belt to operate with smaller pulleys.



Standard Raw Edge Wedge Belts - 

XPZ1400 DUNLOP STANDARD RAW EDGE BELT

Megadyne

Narrow Section Wrapped V-Belts
DIN 7753 and ISO 4184.
Moderately oil-resistant.
Resistant to temperatures from 
-30°C to +80°C. 
Electrically conductive (anti-static) to ISO 1813.
Belt Section 17/B (SPB/17)
Size: maximum width 16.3mm, height 13mm.

NR Basic Wedge Belts



SPB1320 BASIC NR WEDGE BELT

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Wedge Belts

Dunlop BTL

SPZ3350 Standard Wrapped Wedge Belts (9.7 x 3350Lp)

161 Variations

Dunlop BTL

SPZ3550 Standard Wrapped Wedge Belts (9.7 x 3550Lp)

161 Variations

Dunlop BTL

XPZ1400 DUNLOP STANDARD RAW EDGE BELT

2 Variations

Megadyne

SPB1320 BASIC NR WEDGE BELT

Key Information

Policies

© 2024 Cromwell. All rights reserved.