Indexable Mill Drills, Pocket & Profile Cutters

Cutting Tools

coolant_delivery

cutting_edge_angle

depth_of_cut

head_type

height

insert_size

insert_style

maximum_cutting_diameter

milling_application

overall_lengthmm

series

shank_diameter

shank_thread_size

shank_type

toolholder_style

brand

categoryId

stockStatus

Milling

Indexable Bodies

Iscar

The new HeliPlus. All milling cutters are coated with a hard nickel coating called HARD TOUCH that protects the cutter body from wear and tear increasing tool body life. For high precision and super finish milling, HELIPLUS is another advanced design from the world-famous ISCAR HELIMILL family, featuring high 90 shoulder accuracy with no mismatch, leaving a clean mirror-like side wall.

HP ANKT 0702.. Insert
The Heliplus 07 insert is another extension of the HELI2000 family, the full designation is HP ANKT 0702. This insert features a shorter cutting edge of 7mm. The high tooth density enables machining at a very high table feed, resulting in high productivity. This is supported by a very strong insert and pocket design enabling the cutter to be maximised to its full potential.

Features:
Insert and pocket design enable machining at very high table feed for applications with up to 7mm depth-of-cut.
The insert is very strong and durable and available in the very latest sub micron carbide grades specifically designed for arduous milling applications. 
The tool and insert tolerances are very tight, minimising machined surface mismatch and provide very accurate shoulder and 90 slot wall angle. 
Very high surface finishes can be achieved.
Weldon shanks without coolant holes and cylindrical shank with coolant holes to assist in swarf removal when pocketing. 
The tools can ramp down within the catalogue specification.
Available are regular and fine pitch tools with a higher tooth density than those available with ISCAR current tool families enabling much higher productivity to be achieved.

For full specifications please refer to our catalogue.

Iscar HeliPlus Milling Cutters

HP-E90AN-D16-4-MMT10 MILLING CUTTER

Helical cutting edges and high axial rake angles give 
soft and clean cut. High 90 degree shoulder accuracy 
gives no mismatch when machining side walls. 
32 degree ramp down ability. 
Capable of performing plunging applications.

Heli2000 Indexable End Mills

HM90 E90A-D16-2-W16 HELIM ILL CUTTER

HM90 E90A-10: HELI2000 endmills for HM90 AP.. 1003... inserts.

HM90 E90A/AD: Helimill Cutters

HM90 E90A-D20-3-W20 HELIM ILL CUTTER

End Mills with double-sided inserts, diameter range 16-40mm.

H490 E90AX... -09 End Mills
End Mills with double-sided inserts, diameter range 16 - 40mm. 

The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish. Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability. The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO's state-of-the-art of milling insert design, enables excellent performance and extremely high productivity.
H490 - A new family of double-sided inserts with 4 helical cutting edges.

HELIDO H490 End Mills 


H490 E90AX D16-2-C15-09-B, End Mil To Hold H490 ANCX/H490 ANKX

H490 E90AX D16-2-C16-09, End Mil To Hold H490 ANCX/H490 ANKX

H490 E90AX...12 End Mills
End Mills with double-sided inserts, diameter range 25 - 50mm.

The new HELIDO H490 ANKX rectangular inserts have 4 helical right-hand positive cutting edges. They were designed in cutting edge lengths of 9, 12 and 17 mm. Insert construction is very thick and strong; clamped into a dovetail inclined pocket which provides a very rigid clamping and has a wiper which leaves an excellent surface finish. Due to its strong construction, unique chip deflector with positive cutting angles and excellent grade combinations, this new family features high durability, low cutting forces and long tool life. Our most advanced SUMO TEC grades ensure excellent performance and reliability. The new HELIDO tools can be used for machining steel, stainless steel and cast iron at very high machining parameters. HELIDO's state-of-the-art of milling insert design, enables excellent performance and extremely high productivity.
H490 - A new family of double-sided inserts with 4 helical cutting edges

H490 E90AX . . .  12 End Mills

H490 E90AX D32-3-W32-12 H ELIDO ENDMILL

Sandvik Coromant

CoroMillⓇ 490 Square Shoulder Milling Cutter

490-025A20-08M COROMILL

Indexa

Small diameter Indexable End Mills are taking a CCMT 06 insert. Ideal for use on manual and CNC milling 
machines where reach and clearance are required.

Small diameter Indexable End Mills are taking a CCMT 06 insert. Ideal for use on manual and CNC milling machines where reach and clearance are required.

QMC 06 Quad Milling Holder Set

QMC-06 QUAD MILLING HOLDER SET

4 flute, 30° helix short solid carbide ball nose endmills.
Designation: EB040A07-4C04.

Grade: IC900
A tough sub-micron PVD TiAlN coated grade. Suitable for medium to high cutting speed. Designed for machining of heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at interrupted cuts.
ISO Range - P/M/K: (P15-P40)(M20-M30)(K05-K25)
ISO Range - H/S/N: (H10-H25)(S15-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

EB040 A07-4C 04 IC900 Milling Cutter

EB040 A07-4C 04 IC900 MILLING CUTTER

3M E90AX D25-W25-13-C
Weldon shank 90° endmill for 3M AXKT 1304... PDR inserts.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Indexable Mill Drills, Pocket & Profile Cutters

Iscar

HP-E90AN-D16-4-MMT10 MILLING CUTTER

19 Variations

Iscar

HM90 E90A-D16-2-W16 HELIM ILL CUTTER

2 Variations

Iscar

HM90 E90A-D20-3-W20 HELIM ILL CUTTER

6 Variations

Iscar

H490 E90AX D16-2-C15-09-B, End Mil To Hold H490 ANCX/H490 ANKX

16 Variations

Iscar

H490 E90AX D16-2-C16-09, End Mil To Hold H490 ANCX/H490 ANKX

16 Variations

Iscar

H490 E90AX D32-3-W32-12 H ELIDO ENDMILL

6 Variations

Sandvik Coromant

490-025A20-08M COROMILL

13 Variations

Indexa

QMC-06 QUAD MILLING HOLDER SET

Iscar

EB040 A07-4C 04 IC900 MILLING CUTTER

Iscar

3M E90AX D25-W25-13-C MILLING CUTTER

Key Information

Policies

© 2024 Cromwell. All rights reserved.