£10959.00
Ex VAT
£13150.80
Inc VAT
Product Details
Product Specification
Product Documents
Highly versatile ETM-2VS R8 variable speed turret milling machine for milling, drilling and boring operations.
Features and Benefits
• 3 AXIS DRO - Power feed to three axis
• Versatile machine for drilling, milling and boring operations
• Heavy-duty and sturdy machine is made of meehanite casting of generous proportion
• Rigid machine is rated for continuous use and will give you longer life expectancy
• Accurate engineering tolerances have been met by highly skilled engineers during manufacture
• 3hp motor allows you to take large cuts during your production runs
• R8 spindle allows you to use a large selection of standard tooling
• Automatic stop is to up/down feed at the end of the pre-set travel
• Angular positioning to left/right through worm and gear for ease
• Reversible switch allows you to run spindle clock and counter clockwise
• Centralised one shot lubrication ensures lubrication to all parts otherwise inaccessible
• Metric dials with DRO allow you to work in either inch or metric calibrations
• Hardened slide ways gives the machine much longer production life
• Quill feed at three rates of feed give you the option to select the correct feed to quill to suit your individual production requirements
• Servo type variable longitudinal cross and vertical feed and rapid
• Electrically interlocked spindle guard conforms to the latest CE regulations and Health and Safety Standards
• Standard accessories:Power feed to quill - three rates
• Servo type longitudinal, cross and vertical feed and rapid
• One shot lubrication
• Coolant system
• Electrically interlocked spindle guard
• Low volt machine light
• Table size: 228 x 1245mm
• Table travel (long): 838mm
• Saddle travel (cross): 300mm
• Knee travel (vertical): 400mm
• Quill travel: 127mm
• Ram travel: 315mm
• Spindle motor: 2.2kW (3hp)
• Spindle taper: R8
• Quill power feed: 0.04, 0.08, 0.15mm/rev
• Spindle speeds: 70 - 4200 variable speed
• Overall length: 1700mm
• Overall width: 1600mm
• Overall height: 2130mm
• Spindle to table: min. 0mm, max. 415mm
• Spindle to column: min. 170mm, max. 485mm
• Warranty -12 Months (T&Cs Apply)
Need support to find the right solution contact our Technical Product Support Team
Attribute | Value |
---|---|
Brand | Excel |
Dimensions | 1400 x 1470 x 2033mm |
ECLASS Code | 36600390 |
Horsepower | 3hp |
Maximum Spindle Speed | 4200rpm |
Maximum Spindle to Column | 485mm |
Maximum Spindle to Table | 350mm |
MFR Part No. | 1-199-200 |
Minimum Spindle Speed | 60rpm |
Minimum Spindle to Column | 170mm |
Minimum Spindle to Table | 0mm |
Number of Spindle Speeds | Variable |
Number of T-Slots | 3 |
Overall Height | 203cm |
Overall Length | 140cm |
Overall Width | 1470mm |
Phase | Single Phase |
Quill Diameter | 127mm |
Spindle Speed Control | Variable Speed Pulley |
Spindle Taper | R8 |
Standards Met | CE Certified |
T-Slot Size | 16mm |
Table Length | 1246mm |
Table Width | 230mm |
Type | Turret Milling Machine |
UNSPSC Code | 23242500 |
Voltage | 240V |
X-axis Travel | 840mm |
Y-axis Travel | 305mm |
Z-axis Travel | 350mm |