Instrument Stands

Measuring & Test Equipment

stockStatus

brand

categoryId

Height (mm)

Type

Thread Size

Magnetic Pull (kg)

Base Size

Test Gauges & Accessories

Magnetic Stands

Kennedy

With two magnetic faces and large vee. Medium duty special clamp with fine adjustment.
Mounts: 1/4" I/D lug, dovetail stem/spigot diameter: 5/16".
Base dimensions: 60 x 50 x 55mm.
Column height x diameter: Up to 280 x 15mm.
Clamp hole: 8mm.
Magnetic pull: 50kg.

Mag elbow joint stand with a magnetic pull of 50kg. Designed for medium duty special clamp with fine adjustment.

Features and Benefits
• Two magnetic faces that are powerful 
• Lever switchable
• Fully adjustable joints
• Large slotted 'V' groove for versatility

Notes
• Mounts: 1/4in. I/D lug, dovetail stem/spigot 
• Diameter: 5/16in.
• Base dimensions: 60 x 50 x 55mm
• Column height x diameter: Up to 280 x 15mm
• Clamp ring: 6.35mm

Lever Switchable Elbow Joint 2 Mag Stand

2 MAG ELBOW JOINT STAND

Oxford

Lever type, two magnetic faces and large vee. With universal clamp.
Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.
Base dimensions: 60 x 50 x 55mm.
Column height x dia.: 175 x 12mm.
Crossbar length x dia.: 165 x 10.0mm.
Clamp ring: 6.35mm.
Magnetic pull: 50kg.

This universal clamp stand boasts two magnetic faces, a lever type action and a large vee structure. Complete with a large base for stability.

Features and Benefits
• Boasts two magnetic faces for multiple uses
• Large vee structure for stability
• Universal clamp for a wide variety of holding applications

Typical Applications
• Manufacturing
• Laboratories

Specifications
• Mounts: 1/4in. I/D lug, stem/spigot diameter: 1/4in. and 1/8in.
• Column height x dia.:175 x 12mm
• Crossbar length x dia.: 165 x 10mm
• Clamp ring: 6.35mm
• Magnetic pull: 50kg
• Base dimensions:  60 x 50 x 55mm

Universal 2 Mag Stand

UNIVERSAL 2 MAG STAND

The Kennedy® switchable universal magnetic stand has two high strength magnetic faces one with a large vee to allow it to be position and fastened to curved surfaces. The clamps can be set at any position along the column and cross bar allowing the DTI to be positioned exactly where you require it.

Clamping mounts: 1/4" I/D lug. stem/spigot diameter: 1/8", 1/4", 5/16", 3/8".
Base diameter: 60x50x55mm.
Column height x diameter: 175x12mm.
Crossbar length x diameter: 165x10mm.
Magnetic pull: 50kg.

Lever Switchable Universal 2 Mag Stand features two magnetic faces and large vee. Its heavy duty construction makes it ideal for workshop and general maintenance useage.

Features and Benefits
• Heavy duty construction for increased durability
• 2 magnetic faces for 4 secure posistioning
• Magnetic faces feature a pull of up to 50kg

Specifications
• Mounts: 1/4" I/D lug, stem/spigot diameter: 1/4" and 1/8"
• Column height x dia.:175 x 12mm
• Crossbar length x dia.: 165 x 10mm
• Clamp ring: 6.35mm
• Magnetic pull: 50kg
• Base dimensions:  60 x 50 x 55mm

Typical Applications
• Warehouse
• Maintenance

Lever Switchable Universal 2 Mag Stand

2 MAG UNIVERSAL STAND

Magnetic Stand Fitments

With lug adaptor, 1/4" I/D lug. Accepts 4, 8 and 10mm spigot. To fit 10mm bar.

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.



Crossbar Assembly

10mm CROSSBAR ASSEMBLY

Fitted as standard to KEN-333-2100K & KEN-333-2030K. To suit 1/4" I?D lug, stem/spigot dia 1/8", 1/4", 5/16" and 3/8".
Column: 12mm x 175mm. 
Cross Bar: 10mm x 165mm. 
Threaded: M8 x 1.25mm.

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Heavy Duty Fitment - Plain
Fitted as standard to E905 2 Mag Universal Stand and E908 4 Mag Universal Stand.
Column: 12 x 175mm.
Cross bar: 10 x 165mm.
Threaded: M8 x 1.25mm.

Magnetic Stand Fitments - Heavy Duty Fitment, Plain

10mm MAG PLAIN HEAVY DUTY FITMENT

Magnetic Bases

Fitted as standard to KEN- 333-2030K, - 2050K and - 2110K two magnetic faces, bottom and back face. Large vee for curved surfaces.
Threaded: M8 x 1.25mm.
Base dimensions: 60 x 50 x 55mm.
Magnetic pull: 50kg.

Fitted as standard to KEN- 333-2030K, - 2050K and - 2110K, this lever type base boasts two magnetic faces as well as a large vee for curved surfaces. The base has a magnetic pull of 50kg and is threaded to size M8 x 1.25mm.

Features and Benefits
• 2 magnetic faces; one on the bottom and one on the back
• Large vee for curved surfaces
• Threaded M8 x 1.25mm allowing you to attach a stand (sold separately)

Typical Applications
• Laboratory

Lever Type Base, 50kg

50KG MAG LEVER TYPE BASE

Fitted as standard to KEN-333-2060K & KEN-333-2050K. To suit 1/4" I/D lug, stem/spigot diameter 1/8", 1/4", 5/16" and 3/8".
Column: 12mm x 175mm. 
Cross Bar: 10mm x 165mm with fine adjustment. 
Threaded: M8 x 1.25mm.

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Heavy Duty Fitment - Fine Adjusting
Fitted as standard to KEN- 333-2060K and KEN- 333-2050K.
Column: 12 x 175mm.
Cross bar: 10 x 150mm with fine adjustment.
Threaded: M8 x 1.25mm.

Magnetic Stand Fitments - Heavy Duty Fitment, Fine Adjusting

10mm MAG FINE ADJUSTING HEAVY DUTY FITMENT

With lug adaptor, 1/4" I/D lug. Accepts 1/8” and 1/4” spigot. To fit 10mm bar.

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Crossbar Assemblies with lug adaptor. 1/4" I/D lug

3000K Accepts 5/16" & 1/4" spigot, to fit 10mm bar.
3640K Accepts 1/8" & 1/4" spigot, to fit 10mm bar.

Spigot Fitment - Fits 10mm Bar

1/8" & 1/4" SPIGOT FITMENT TO FIT 10mm BAR

Compact in design, this stand still has a magnetic pull of 40kg with positive switching, fully adjustable joints and slotted 'V' groove.

Compact in design, this stand still has a magnetic pull of 30kg with positive switching, fully adjustable joints and slotted 'V' groove.

Lever Switchable Mini Elbow Joint 2 Mag Stand

2 MAG MINI ELBOW JOINT STAND

Mitutoyo

Flexible magnetic stand with precision smooth segments linked by a steel cable. Locked in position by lever at the bottom of base. On/off lever releases magnet. 
Suitable for stem diameter 6 and 8mm. Column: 16mm dia. x 335mm.

Mitutoyo Flexi-Stand

7012-10 FLEXIBLE MAGNETIC STAND

For fitting between columns and mounting spigots. Simple Type.

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Knuckle Clamps are designed for connecting columns and crossbars.

Magnetic Stand Fitments - Knuckle Clamp

12mmx10mm KNUCKLE CLAMP

With two magnetic faces and large vee. Heavy duty with universal clamp and fine adjustment.
Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.
Base dimensions: 60 x 50 x 55mm.
Column height x dia.: 175 x 12mm.
Crossbar length x dia.: 165 x 10mm.
Clamp ring: 6.35mm.
Magnetic pull: 50kg.

Kenendy Lever Switchable Fine Adjustable 2 Mag Stand

2 MAG FINE ADJUSTING STAND

This large stand still has two powerful magnetic faces producing a magnetic pull of 80kg. It has positive switching, fully adjustable joints and slotted 'V' groovefor versatility.

Large stand with two powerful magnetic faces producing a magnetic pull of 80kg. 
Positive switching, fully adjustable joints and slotted 'V' groove for versatility.

Typical Applications
• Lever type for easy and stable adjustment
• Fully adjustable joints and slotted 'V' groove for excellent posability
• Magnetic pull of 80kg for greater hold and stability

Notes
• Mounts: 1/4" I/D lug, dovetail stem/spigot diameter: 5/16"
• Base dimensions: 60 x 50 x 55mm
• Column height x dia.: up to 300 x 17mm


Lever Switchable Large Elbow Joint 2 Mag Stand

2 MAG LARGE ELBOW JOINT STAND

Eclipse Magnetics

This mechanical one-piece stand (base and fitments) is widely used for inspecting and positioning workpieces.

Features and Benefits
• Can be affixed to flat or curved surfaces for versatility of use
• Allows for precision working with an impressive pull of 80kg

Notes
• Dial gauge not included

Magnetic Lever Switch Base & Stand

E910 MAGNETIC BASE

Fitted as standard to KEN-333-2010K. 
Column: 6.3mm x 120mm. 
Threaded: M6 x 1mm.

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Light Duty Fitment - Plain
Fitted as standard to E909 Kennedy Mini-Mag Stand. Column: 6.3 x 120mm. 
Clamp hole: 8mm.
Threaded: M5.

Magnetic Stand Fitments - Light Duty Fitment, Plain

6.3mm MAG PLAIN LIGHT DUTY FITMENT

Mini-Mag Stand
With one magnetic face. Light duty with standard clamp, 30mm diameter keeper.
Mounts: 1/4" I/D lug, stem/spigot diameter: 5/16".
Column height x dia.: 120 x 6.3mm.
Clamp hole: 8mm.
Magnetic pull: 14.75kg.
Base dimensions: 30 x 35mm.

Permanent Mag Stand

MINI-MAG STAND

Magnetic on three sides, these Magnetic Bases with Toggle Switches allow you to effectively inspect workpieces with precision. Guaranteed to hold with impressive magnetic pull to suit your needs.
Available in two sizes.

Features and Benefits
• Has the ability to clamp onto curved surfaces as well as flat for versatility of use
• Can be fixed onto any ferrous surface
• Holds Eclipse Magnetics fitments for inspecting varying workpieces

Typical Applications
• Holding and positioning dial indicators and gauges
• Securing workpieces during machining or inspection
• Mounting lights, cameras, or other tools in metalworking and machining environments
• Providing a temporary magnetic base for various measuring and testing equipment


Magnetic Bases with Toggle Switch

Eclipse Standard Magnetic Base - E905WF 50KG PACK OF 1

With four magnetic faces, one at 45°. Universal clamp.
Mounts: 1/4" I/D lug, stem/spigot diameter: 1/8", 5/16" and 3/8".
Base dimensions: 48 x 44 x 51mm.
Column height x dia.: 175 x 12mm.
Crossbar x dia.: 165 x 10.0mm.
Clamp ring: 6.35mm.
Magnetic pull: 30kg.

Universal 4 Mag Stand

UNIVERSAL 4 MAG STAND

Able to be paired with some of the Eclipse Magnetic Bases, these Mechanical Fitment Stands enable you to comfortably secure your equipment whilst you work. Also features a screw thread base to allow attachment to a compatible base.
Available in two sizes to suit personal needs and requirements.


Features and Benefits
• Has the ability to be tightened to secure your equipment in the stand
• Screw thread base to allow for ease of attaching to the compatible magnetic base or the required machinery
• Features a hardy hinge arm to adapt to your needs

Typical Applications
• Used for mounting lighting and measuring equipment 

Mechanical Fitment Stands

ECLIPSE MAGNETICS  RP999L LARGE MECHANICAL FITMENT STAND M10 PK1

With four magnetic faces, one at 45°. Heavy duty with universal clamp.
Mounts: 1/4” I/D lug, stem/spigot diameter: 1/4”, 5/16”.
Base dimensions: 64 x 64 x 76mm.
Column height x diameter: 266 x 20mm.
Crossbar length x diameter: 200 x 14.0mm.
Magnetic pull: 80kg.

Major 4 Mag Stand

4 MAG MAJOR STAND

Lever type two magnetic faces and large vee. Universal clamp. 
Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.
Base dimensions: 60 x 50 x 55mm.
Column height x dia.: 175 x 12mm.
Crossbar length x dia.: 150 x 10.0mm.
Clamp ring: 6.35mm.
Magnetic pull: 50kg.

The Oxford Precision Fine Adjustment 2 Mag Stand is a versatile tool with a lever-type design featuring two magnetic faces and a large Vee. This stand is equipped with a universal clamp, providing flexibility in securing various workpieces. The lever-type adjustment allows for precise fine-tuning, ensuring accuracy in positioning. With the added convenience of two magnetic faces and a large Vee, this stand offers a reliable and stable platform for a variety of applications. Whether used in manufacturing, inspection, or other precision tasks, the Oxford Precision Fine Adjustment 2 Mag Stand is a valuable tool for professionals requiring stability and fine adjustment capabilities in their work.

Features and Benefits
• Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush
• Base dimensions: 60 x 50 x 55mm
• Column height x dia.: 175 x 12mm
• Crossbar length x dia.: 150 x 10.0mm
• Clamp ring: 6.35mm
• Magnetic pull: 50kg

Fine Adjustment 2 Mag Stand

FINE ADJUSTMENT 2 MAG STAND

With four magnetic faces, one at 45°. Heavy duty with universal clamp and fine adjustment.
Mounts: 1/4” I/D lug, stem/spigot diameter: 1/8”, 1/4”.
Base dimensions: 64 x 64 x 76mm.
Column height x diameter: 175 x 12mm.
Crossbar length x diameter: 165 x 10.0mm.
Magnetic pull: 80kg.

Fine Adjusting 4 Mag Stand

4 MAG FINE ADJUSTING STAND

With four magnetic faces, one at 45°. Medium duty with standard clamp.
­Mounts: 1/4" I/D lug, stem/spigot diameter: 5/16".
Base dimensions: 48 x 44 x 51mm.
Column height x diameter: 185 x 12mm.
Crossbar length x diameter: 150 x 6.3mm.
Clamp ring: 8mm.
Magnetic pull: 30kg.

Compact 4 Mag Stand

4 MAG COMPACT STAND

Fitted as standard to KEN-333-2110K. 
To suit 1/4" I/D lug, dovetails, stem/spigot diameter 5/16".
3 point adjustable column: 15mm x 280mm max. 
Threaded: M8 x 1.25mm.

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Medium Duty Fitment - 3 Point
Fitted as standard to KEN- 333-2110K.
3 point adjustable column: 15 x 280mm max.
Threaded: M8 x 1.25mm.
Clamp hole: 8mm.

Magnetic Stand Fitments - Medium Duty Fitment, 3 Point

3-POINT MAG MEDIUM DUTY FITMENT

All Main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Instrument Stands

Kennedy

2 MAG ELBOW JOINT STAND

Oxford

UNIVERSAL 2 MAG STAND

Kennedy

2 MAG UNIVERSAL STAND

Kennedy

10mm CROSSBAR ASSEMBLY

2 Variations

Kennedy

10mm MAG PLAIN HEAVY DUTY FITMENT

Kennedy

50KG MAG LEVER TYPE BASE

Kennedy

10mm MAG FINE ADJUSTING HEAVY DUTY FITMENT

Kennedy

1/8" & 1/4" SPIGOT FITMENT TO FIT 10mm BAR

Kennedy

2 MAG MINI ELBOW JOINT STAND

Mitutoyo

7012-10 FLEXIBLE MAGNETIC STAND

Kennedy

12mmx10mm KNUCKLE CLAMP

Kennedy

2 MAG FINE ADJUSTING STAND

Kennedy

2 MAG LARGE ELBOW JOINT STAND

Eclipse Magnetics

E910 MAGNETIC BASE

Kennedy

6.3mm MAG PLAIN LIGHT DUTY FITMENT

Kennedy

MINI-MAG STAND

Eclipse Magnetics

Eclipse Standard Magnetic Base - E905WF 50KG PACK OF 1

2 Variations

Oxford

UNIVERSAL 4 MAG STAND

Eclipse Magnetics

ECLIPSE MAGNETICS RP999L LARGE MECHANICAL FITMENT STAND M10 PK1

2 Variations

Kennedy

4 MAG MAJOR STAND

Oxford

FINE ADJUSTMENT 2 MAG STAND

Kennedy

4 MAG FINE ADJUSTING STAND

Kennedy

4 MAG COMPACT STAND

Kennedy

3-POINT MAG MEDIUM DUTY FITMENT

Kennedy

1/4"x5/16" KNUCKLE ASSEMBLY

Key Information

Policies

© 2024 Cromwell. All rights reserved.