Engineering Materials

Materials, Maintenance & Standard Parts

diameter

length

material

material_form

specification

surface_finish

thickness

width

brand

categoryId

stockStatus

newProduct

Materials

Indexa

Brass alloy CZ121 / CW614N is used for machining. It has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers.

• The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts.

• The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance.

• Typically used for wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,
butts, hinges and also locks and components for watches.

Brass Round Bar x 500mm

25mm x 500mm Brass Round Bar CW614N / CZ121- 1 PCE

These brass round bars are manufactured from a brass alloy CZ121 / CW614N that is primarily used for machining. Each bar has Lead added to the composition to improve machinability. The Lead remains insoluble in the microstructure of the brass and the soft particles act as chip breakers. Available in two diametersm with both products measuring 500mm in length.

Features and Benefits
• The most widely used of all the brasses due to its suitability for high speed machining operations and also the manufacture of intricate parts
• The highest machinability of any copper alloy, excellent hot formability and good corrosion resistance
• Available in two sizes to suit your requirements
• Both products possess good conductivity, corrosion resistance and spark resistance for all around durability

Typical Applications
• Typically used for a wide variety of machined components made on high speed lathes including screws, bolts, nuts, bushing, pins, washers,
butts, hinges and also locks and components for watches

Notes
• Cold working is poor and is not recommended with these bars

Brass Round Bars, 500mm Long

10MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

8MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

Type 1.4305
• Popularly known as grade 303 stainless steel which is the most readily machinable of all the austenitic grades due to the presence of sulphur

• Used in applications that require parts to be heavily machined, including nuts and bolts, screws, gears, aircraft fittings, bushings & shafts.

303 Stainless Steel Round Bar x 1.5m 

30mm x 1.5m Stainless Steel Round Bar 1.4305/303 - 1 PCE

CW004A/C101
• The most widely used of all the coppers because of its combination of electrical and thermal conductivity, corrosion resistance, workability and aesthetic beauty.

• The normal grade for general electrical use as busbar, motor and transformer components, windings and many other current carrying applications.

• Used in motors, contacts, terminals and many other current carrying applications. Other uses include architectural metalwork, gutters, flashing, roofing, automotive and industrial radiators, chemical process equipment, vats, kettles and pans.

Copper Round Bar x 24"

1" x 24" Copper Round Bar CW004A/C101 - 1 Pce

These bars are made from what is popularly known as grade 303 stainless steel, the most readily machinable of all the austenitic grades, due to the presence of sulphur. These highly versatile bars also have excellent resistance to corrosion and therefore have a long lifespan.

Features and Benefits
• Made from 303 stainless steel
• Versatile bars
• High resistance to corrosion

Typical Applications
• Used in applications that require parts to be heavily machined, including nuts and bolts, screws, gears, aircraft fittings, bushings & shafts.

303 Stainless Steel Round Bars, 1.5m 

20MMx1500MM ST/STEEL ROUND BAR 1.4305/303 (1 PCE)

These equal angles are manufactured from grade 6063 aluminum, which is a medium strength alloy with additions of magnesium and silicon. Available in an array of sizes, all products are sold in imperial sizes and are 1 metre in length.

Features and Benefits
• Has good formability in manufacture, is heat treatable and offers good mechanical properties for all around quality
• Also has a high corrosion resistance and is readily suited to welding
• Available in arrange of sizes to suit your needs
• Saves you time and material wastage as the equal angles are pre-cut to suit the size that best works for your requirements

Typical Applications
• Typically used in architectural and industrial applications such as complex extrusions for window frames, doors frames, roofs, signs, shop fittings,
stair balustrades rails and posts

6063 Aluminium Equal Angles, 1000mm

1"x1"x1/8"x1 MTR ALUMINIUM ANGLE 6063(1 PCE)

Grade 1050
• Excellent corrosion resistance, high ductility and highly reflective finish alloy.

• For chemical process plant equipment, food industry containers, pyrotechnic powder, architectural flashings, lamp reflectors and cable sheathing.

Grade 1050 Aluminium Mill Finish Sheet

500mm x 300mm x 12mm Grade 1050 Aluminium Mill Finish Sheet - 1 Pce

A material that is versatile, lightweight, fire retardant, durable and with a flawless finish. Offering unlimited options for the sign, display & print industries. Foam PVC sheet offers an exceptional strength to weight ratio and its durability ensures superior resistance to knocks and scratches. As it is a fraction of the wight of solid display material, it is easier to handle and install. The smooth surface provides a consistently even and reliable high performance surface for different types of printing and mounting. Foam PVC can be used in sign, display, printing and fabrication applications. Available in white or Black.

3mm PVC Foam Sheet 

1220mm x 1220mm x 3mm PVC Foam Sheet  White - 1 Pce

CW508L / CZ108HH is a high purity cold forming brass. It is used when severe bending properties are required. It can be machined but only with slow speeds and very light feeds.

• Often used for general purpose applications and forming operations when very good bending properties are required.

• Also offers very good general corrosion resistance in many natural atmospheres, a reasonable machinability and good cold heading properties

• Used for a variety of decorative components as well as general components such as heat exchangers, lamp caps, lamp-holder and switch components, general copper-smithing work, chains, eyelets, fasteners, hinges, locks, instrument covers and blanked articles such as instrument plates and wheels.

• Other uses include cold headed items including pins, rivets, screws, springs, radiator tanks and torch cases.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Engineering Materials

Indexa

25mm x 500mm Brass Round Bar CW614N / CZ121- 1 PCE

2 Variations

Indexa

10MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

2 Variations

Indexa

8MMx500MM BRASS ROUND BARCW614N/CZ121 (1 PCE)

2 Variations

Indexa

30mm x 1.5m Stainless Steel Round Bar 1.4305/303 - 1 PCE

3 Variations

Indexa

1" x 24" Copper Round Bar CW004A/C101 - 1 Pce

Indexa

20MMx1500MM ST/STEEL ROUND BAR 1.4305/303 (1 PCE)

5 Variations

Indexa

1"x1"x1/8"x1 MTR ALUMINIUM ANGLE 6063(1 PCE)

4 Variations

Indexa

500mm x 300mm x 12mm Grade 1050 Aluminium Mill Finish Sheet - 1 Pce

Indexa

1220mm x 1220mm x 3mm PVC Foam Sheet White - 1 Pce

4 Variations

Indexa

600mm x 300mm x 1.6mm Brass Sheet CW508L / CZ108HH - 1PC

2 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.