Milling Inserts

Cutting Tools

categoryId

newProduct

stockStatus

Brand

Insert Style

Shape

Manufacturer Grade

Insert Size

Material

Cutting Direction

Chipbreaker

Pack Quantity

Series

Milling

Iscar

FFX4 XNMU : Small double-sided "bone shape" inserts with 4 cutting edges, for fast feed milling. Used for small size pockets and profiling and face milling. 

Grade IC882
(M25-M40)(S20-S30)
PVD - TiAlN+TiN Coated insert for machining austenitic stainless steel, titanium and high temperature alloys. 




FFX4 XNMU Milling Inserts Grade IC882

FFX4 XNMU 040310HP, Milling Insert, Carbide, Grade IC882

FFX4 XNMU : Small double-sided "bone shape" inserts with 4 cutting edges, for fast feed milling. Used for small size pockets and profiling and face milling. 

Grade IC5820
(M20-M35)(S15-S25)
CVD - Al2O3 Coated insert for machining austenitic stainless steel, titanium and high temperature alloys.
  




FFX4 XNMU Milling Inserts Grade IC5820

FFX4 XNMU 040310HP, Milling Insert, Carbide, Grade IC5820

FFX4 XNMU : Small double-sided "bone shape" inserts with 4 cutting edges, for fast feed milling. Used for small size pockets and profiling and face milling. 

Grade IC808
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
PVD - TiAlN/AlTiN+TiN  Coated grade providing high wear resistance for use on a wide range of materials. 




FFX4 XNMU Milling Inserts Grade IC808

FFX4 XNMU 040310T, Milling Insert, Carbide, Grade IC808

FFX4 XNMU : Small double-sided "bone shape" inserts with 4 cutting edges, for fast feed milling. Used for small size pockets and profiling and face milling. 

Grade IC810
(P15-P30)(K15-K35)
PVD - AlTiN+TiN Coated first choice insert for milling nodular cast iron at medium to high cutting speeds. 




FFX4 XNMU Milling Inserts Grade IC810

FFX4 XNMU 040310T, Milling Insert, Carbide, Grade IC810

FFX4 XNMU : Small double-sided "bone shape" inserts with 4 cutting edges, for fast feed milling. Used for small size pockets and profiling and face milling. 

Grade IC830
(P20-P40)(M25-M35)(S15-S30)
PVD - TiAlN/AlTiN+TiN Coated insert for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance 




FFX4 XNMU Milling Inserts Grade IC830

FFX4 XMNU 040310T, Milling Insert, Carbide, Grade IC830

FFT3 TXMT 02 : Triangular miniature inserts for very high feed milling at small depth of cut. 

Grade IC830
(P20-P40)(M25-M35)(S15-S30)
PVD - TiAlN/AlTiN+TiN Coated insert with high toughness and wear resistance for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel




FFT3 TXMT Milling Insert Grade IC830

FFT3 TXMT 020105T, Milling Insert, Carbide, Grade IC830

FFT3 WXMT 03 - Single-sided small trigon inserts for Fast Feed milling. 

Grade IC808
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
PVD - TiAlN/AlTiN+TiN Coated insert with high wear resistance for use on a very wide range of materials. 

FFT3 WXMT Milling Insert Grade IC808

FFT3 WXMT 030206T, Milling Insert, Carbide, Grade IC808

FFT3 WXMT 03 - Single-sided small trigon inserts for Fast Feed milling. 

Grade IC830
(P20-P40)(M25-M35)(S15-S30)
PVD -	TiAlN/AlTiN+TiN Coated insert with high toughness and wear resistance for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel.

FFT3 WXMT Milling Insert Grade IC830

FFT3 WXMT 030206T, Milling Insert, Carbide, Grade IC830

HM390 TPKR 0401 : Triangular miniature inserts with 3 helical cutting edges for 90° shoulders. For general use applications that require small diameter ednmills.

Grade IC830 
(P20-P40)(M25-M35)(S15-S30)
PVD -	TiAlN/AlTiN+TiN Coated insert with high toughness and wear resistance for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel.

HM390 TPKR Milling Insert Grade IC830

HM390 TPKR 0401-PCTR, Milling Insert, Carbide, Grade IC830

HM390 TPKT/CT 0502 	Triangular inserts with 3 helical cutting edges for 90° shoulder accuracy. For general use applications.  

Grade IC808
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
PVD - TiAlN/AlTiN+TiN Coated insert with high wear resistance, recommended for a wide range of materials.


HM390 TPKT Milling Insert Grade IC808

HM390 TPKT 0502PDR, Milling Insert, Carbide, Grade IC808

HM390 TPKT/CT 0502 	Triangular inserts with 3 helical cutting edges for 90° shoulder accuracy. For general use applications.  

Grade IC810
(P15-P30)(K15-K35)
PVD 	AlTiN+TiN Coated first choice insert for milling nodular cast iron at medium to high cutting speeds.


HM390 TPKT Milling Insert Grade IC810

HM390 TPKT 0502PDR, Milling Insert, Carbide, Grade IC810

T890 LNHT 1306PNTR -Tangentially clamped inserts with 4 or 8 cutting edges for general use

• Four-sided tangentially clamped insert with 8 right-hand cutting edges
•  0.8 mm corner radii
•  9.5 mm maximum depth of cut
•  Cutting edge count 8

Insert Grade IC808
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
"SUMO TEC" TiAlN PVD coating providing high wear resistance for use on a wide range of materials.

T890 LNHT 1306 Tangentially Clamped Milling Inserts Grade IC808   

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC808

T890 LNHT 1306PNTR -Tangentially clamped inserts with 4 or 8 cutting edges for general use

• Four-sided tangentially clamped insert with 8 right-hand cutting edges
•  0.8 mm corner radii
•  9.5 mm maximum depth of cut

Insert Grade IC810
(P15-P30)(K15-K30)
PVD 	AlTiN+TiN First choice coated insert for milling nodular cast iron at medium to high cutting speeds.

T890 LNHT 1306 Tangentially Clamped Milling Inserts Grade IC810  

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC810

T890 LNHT 1306PNTR -Tangentially clamped inserts with 4 or 8 cutting edges for general use

• Four-sided tangentially clamped insert with 8 right-hand cutting edges
•  0.8 mm corner radii
•  9.5 mm maximum depth of cut
• Cutting edge count 8

Insert Grade IC830 
(P20-P40)(M25-M35)(S15-S30)
PVD TiAlN/AlTiN+TiN Coated insert for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance.


T890 LNHT 1306 Tangentially Clamped Milling Inserts Grade IC830 

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC830

T890 LNHT 1306PNTR -Tangentially clamped inserts with 4 or 8 cutting edges for general use

• Four-sided tangentially clamped insert with 8 right-hand cutting edges
•  0.8 mm corner radii
•  9.5 mm maximum depth of cut
•  Cutting edge count 8

Insert Grade IC845
(P25-P45)
PVD AlTiN Coated insert for milling alloyed steel, recommended for interrupted cuts and heavy operations.  

T890 LNHT 1306 Tangentially Clamped Milling Inserts Grade IC845  

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC845

T890 LNHT 1306PNTR -Tangentially clamped inserts with 4 or 8 cutting edges for general use

• Four-sided tangentially clamped insert with 8 right-hand cutting edges
•  0.8 mm corner radii
•  9.5 mm maximum depth of cut
• Cutting edge count 8

Insert Grade IC5100
(K10-K25)
CVD 	TICN+AL203 Coated insert for milling grey cast iron at high cutting speeds. This provides extended tool life. 

T890 LNHT 1306 Tangentially Clamped Milling Inserts Grade IC5100

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC5100

T890 LNHT 1306PNTR -Tangentially clamped inserts with 4 or 8 cutting edges for general use

• Four-sided tangentially clamped insert with 8 right-hand cutting edges
•  0.8 mm corner radii
•  9.5 mm maximum depth of cut
•  Cutting edge count 8

Insert Grade IC5500
(P20-P35)
CVD  Al2O3 Coated insert for milling martensitic (low in Ni) stainless steel at high cutting speed.

T890 LNHT 1306 Tangentially Clamped Milling Inserts Grade IC5500

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC5500

TRFF TXMT 0702 - Single sided insert with three cutting edges for high feed machining
•  18˚ cutting edge angle
•  Three cutting edges
• .024" maximum depth of cut
•  Ramping down capability
• .039" radius for programming

TRFF TXMT 1004 - Single sided insert with three cutting edges for fast feed machining
• 17˚ cutting edge angle
• Three cutting edges
• 031" maximum depth of cut
• Ramping down capability
• .055" radius for programming

Insert Grade IC808 
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
PVD TiAlN/AlTiN+TiN Coated insert that provides high wear resistance. Recommended for a very wide range of materials.

TRFF TXMT Single Sided Insert Milling Insert Grade IC808 

TRFF TXMT 0702, Milling Insert, Carbide, Grade IC808

TRFF TXMT 0702 - Single sided insert with three cutting edges for high feed machining
•  18˚ cutting edge angle
•  Three cutting edges
• .024" maximum depth of cut
•  Ramping down capability
• .039" radius for programming

TRFF TXMT 1004 - Single sided insert with three cutting edges for fast feed machining
• 17˚ cutting edge angle
• Three cutting edges
• 031" maximum depth of cut
• Ramping down capability
• .055" radius for programming

Insert Grade IC830 
(P20-P40)(M25-M35)(S15-S30)
PVD 	TiAlN/AlTiN+TiN Coated grade providing high toughness and wear resistance for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel.

TRFF TXMT Single Sided Insert Milling Insert Grade IC830

TRFF TXMT 0702, Milling Insert, Carbide, Grade IC830

TRFF TXMT 1004, Milling Insert, Carbide, Grade IC808

TRFF TXMT 1004, Milling Insert, Carbide, Grade IC830

TR6 TNCU Double Sided Milling Inserts 

TR6 TNCU 0702 - Double sided ground inserts with six cutting edges, available with .0197, .0394 and .0590" corner radii.
• Six cutting edges
• Positive rake angle

TR6 TNCU 1004 - Double sided insert with six round cutting edges, available in .0197 to .1181" corner radii
Features
• Six cutting edges
• Positive rake angle
• Provides excellent surface finish

Insert Grade IC830 
(P20-P40)(M25-M35)(S15-S30)
PVD 	TiAlN/AlTiN+TiN Coated grade providing high toughness and wear resistance for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel.

TR6 TNCU Double Sided Milling Inserts Grade IC830 

TR6 TNCU 100410, Milling Insert, Carbide, Grade IC830

TR6 TNCU Double Sided Milling Inserts 

TR6 TNCU 0702 - Double sided ground inserts with six cutting edges, available with .0197, .0394 and .0590" corner radii.
• Six cutting edges
• Positive rake angle

TR6 TNCU 1004 - Double sided insert with six round cutting edges, available in .0197 to .1181" corner radii
Features
• Six cutting edges
• Positive rake angle
• Provides excellent surface finish

Insert Grade IC808 
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
PVD TiAlN/AlTiN+TiN Coated insert that provides high wear resistance. Recommended for a very wide range of materials.


TR6 TNCU Double Sided Milling Inserts Grade IC808

TR6 TNCU 100415, Milling Insert, Carbide, Grade IC808

TR6 TNCU Double Sided Milling Inserts 

TR6 TNCU 1004 - Double sided insert with six round cutting edges, available in .0197 to .1181" corner radii
Features
• Six cutting edges
• Positive rake angle
• Provides excellent surface finish

Insert Grade IC882
(M25-M40)(S20-S30)
PVD TiAlN+TiN Coated grade for machining austenitic stainless steel, titanium and high temperature alloys.  

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Milling Inserts

Iscar

FFX4 XNMU 040310HP, Milling Insert, Carbide, Grade IC882

Iscar

FFX4 XNMU 040310HP, Milling Insert, Carbide, Grade IC5820

Iscar

FFX4 XNMU 040310T, Milling Insert, Carbide, Grade IC808

Iscar

FFX4 XNMU 040310T, Milling Insert, Carbide, Grade IC810

Iscar

FFX4 XMNU 040310T, Milling Insert, Carbide, Grade IC830

2 Variations

Iscar

FFT3 TXMT 020105T, Milling Insert, Carbide, Grade IC830

Iscar

FFT3 WXMT 030206T, Milling Insert, Carbide, Grade IC808

Iscar

FFT3 WXMT 030206T, Milling Insert, Carbide, Grade IC830

Iscar

HM390 TPKR 0401-PCTR, Milling Insert, Carbide, Grade IC830

Iscar

HM390 TPKT 0502PDR, Milling Insert, Carbide, Grade IC808

Iscar

HM390 TPKT 0502PDR, Milling Insert, Carbide, Grade IC810

Iscar

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC808

Iscar

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC810

Iscar

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC830

Iscar

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC845

Iscar

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC5100

Iscar

T890 LNHT 1306PNTR, Milling Insert, Carbide, Grade IC5500

Iscar

TRFF TXMT 0702, Milling Insert, Carbide, Grade IC808

2 Variations

Iscar

TRFF TXMT 0702, Milling Insert, Carbide, Grade IC830

2 Variations

Iscar

TRFF TXMT 1004, Milling Insert, Carbide, Grade IC808

2 Variations

Iscar

TRFF TXMT 1004, Milling Insert, Carbide, Grade IC830

2 Variations

Iscar

TR6 TNCU 100410, Milling Insert, Carbide, Grade IC830

7 Variations

Iscar

TR6 TNCU 100415, Milling Insert, Carbide, Grade IC808

8 Variations

Iscar

TR6 TNCU 100415, Milling Insert, Carbide, Grade IC882

4 Variations

Iscar

TR6 TNCU 100420, Milling Insert, Carbide, Grade IC808

8 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.