Inspection Tags

Site Safety

colour

pack_quantity

type

brand

categoryId

stockStatus

Identification & Inspection

Centurion Europe

The Work at Height Regulations came into force in 2005.  These regulations apply to work at height where there is a risk of fall liable to cause personal injury.  This applies to both internal and external work at height, and includes below ground level and low height.

All ladders should be checked daily and prior to use for any damage, faults or wear and tear.  In addition they should be inspected at defined intervals as part of a risk assessment programme.  Use these inserts to manage the identification, safety, maintenance of ladders and help conform to the Work at Height Regulations 2005.

An OmniTag holder should be permanently fixed to the ladder in a suitable safe place.  Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag.  If the ladder fails the inspection remove insert and inform a supervisor.

The OmniTag clearly states 'Do not use this equipment' when the tag is removed.

Ladder Tag Inserts

Ladder Tag Inserts - Pack of 10

Sitesafe

N.B. Picture does not show all parts of the Scafftag Laddertag System. Picture is for illustration purposes only. For more detailed information please refer to our catalogue.

This pack of ten Laddertag® holders are robust and highly visible. An essential piece of signage to keep staff safe, this prohibition holder is designed to operate with Laddertag® inserts and other control procedures employed on site.

Features and Benefits
• Displays 'Do Not Use' message until an insert confirming the ladder's safety is added
• Permanently attaches to a ladder to ensure visible safety checks are in place
• Ensures clear communication with staff on safety

Laddertag® Holders, Pack of 10

Laddertag® Holders - Pack of 10

Robust and highly visible, the Laddertag® inserts allow for the latest information on-site ladder inspections to be logged and dated for safety auditing purposes.

Features and Benefits
• Up to 12 planned inspections
• Space for inspector signatures
• Each tag has a unique ladder reference
• The reverse of each tag has a handy ladder inspection checklist
• Available in packs of 10 or 50 to suit your needs

Standards
• BS EN 131

Laddertag® Inserts

Laddertag® Inserts - Pack of 10

This can be used on a multitude of applications, from asset identification through to inspection. Manufactured from an extremely durable TPU (polyurethane) they are flexible, extremely durable and suitable for use in any weather conditions. In addition they are resistant to high and low temperatures and to most acids, alkali and solvents. The integral slots allow the tag to be fastened through itself at two positions to suit the individual application. Available in 8 colours either plain, pre-printed from the selection opposite or with your own graphics, they can be written on using apermanent marker or even a standard ball point pen.

• Flexible and durable
• Weatherproof
• Range of colours
• Single or double sided
• Custom print available

AssetTag Flex Do Not Use Tags

TGF0501R AssetTag Flex - Do Not Use 1 - Red - Single

Ladder Tag Inserts - Pack of 50

Matlock

Highly visible warning tags. Should be applied alongside a lockout device to provide details of the lockout procedure. Flexible polyester tags, resistant to water, oil and extreme temperatures. Matt surface allows you to write on them. 
Pack of 10 tags with cable ties. 


Lockout Warning Tags - Double-Sided

LOCKOUT TAGS DO NOT USE (PK-10)

The AssetTag flex inspection tags can be used on a multitude of applications, from asset identification through to inspection. Manufactured from an extremely durable TPU (polyurethane) they are flexible, extremely durable and suitable for use in any weather conditions. In addition they are resistant to high and low temperatures and to most acids, alkali and solvents. The integral slots allow the tag to be fastened through itself at two positions to suit the individual application. 

Features and Benefits
• Made from flexible and durable polyurethane for use in a variety of applications
• Self-fastening at two points for convenience
• Weatherproof and resistant to heat and cold for use in a range of weather conditions
• Available in a range of colours to suit requirements
• Single or double sided
• Can be written on using a permanent marker or ball-point pen
• Resistant to most acids, alkalis and solvents to suit applications in a variety of industries

AssetTag Flex Inspection Tags

TGF0201R AssetTag Flex - Inspection 2 - Red - Single

Flexible polyester tags, resistant to water, oil and extreme temperatures. Matt surface allows you to write on them. 
Pack of 10 tags with cable ties. 
Size: 75 x 135mm.

LOCKOUT TAGS DO NOT START (PK-10)

Self adhesive vinyl labels, supplied on a roll. Suitable for most applications. 250 labels per roll.

A range of labels perfect for managing your company's maintenance and warehouse procedures.
A choice of two materials:
1. Self-adhesive vinyl - hard wearing, adhesive labels that are suitable for most applications. 250 labels per roll.
2. Vinyl cloth - highly versatile and adheres to most surfaces. These firmly adhering labels can be deliberately removed on several occasions. 250 labels per roll.

Quality Control Labels

TESTED VINYL LABEL 25x40m m S/ADH (ROLL-250)

The most popular status management system for electrical testing.
• Enables maximum visibility with minimal attachment space, the tags are a heavy-duty alternative to labels which are prone to damage in industrial environment.
• The holder displays 'DO NOT USE EQUIPMENT' prior to inspection when a choice of three colour inserts are available to use..
• The holder can be attached to the equipment with adhesive or to the power lead with cable ties.
• Plant &  Machinery Microtag® Kit contains 20 holders, 40 cable ties (150mm long) and 1 pen. Inserts are available separately.

- The most popular status management system for electrical testing.
- Made of durable polypropylene, can be written on and then wiped clean for increased re-usabilty
- For use with our Microtag® Holders
- Complies with legislative requirements 

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Inspection Tags

Centurion Europe

Ladder Tag Inserts - Pack of 10

2 Variations

Sitesafe

Laddertag® Holders - Pack of 10

Sitesafe

Laddertag® Inserts - Pack of 10

2 Variations

Centurion Europe

TGF0501R AssetTag Flex - Do Not Use 1 - Red - Single

6 Variations

Centurion Europe

Ladder Tag Inserts - Pack of 50

2 Variations

Matlock

LOCKOUT TAGS DO NOT USE (PK-10)

4 Variations

Centurion Europe

TGF0201R AssetTag Flex - Inspection 2 - Red - Single

2 Variations

Matlock

LOCKOUT TAGS DO NOT START (PK-10)

4 Variations

Sitesafe

TESTED VINYL LABEL 25x40m m S/ADH (ROLL-250)

16 Variations

Sitesafe

Microtag® Green Inserts - Pack of 20

3 Variations

Key Information

Policies

© 2024 Cromwell. All rights reserved.