Fixturing

Cutting Tools

newProduct

stockStatus

brand

categoryId

Thread Size

Type

Material

Dimensions

rangeable_c_(mm)

Set Size (PCE)

rangeable_weight_(kg)

System of Measurement

Length

Width (mm)

Length (mm)

B (mm)

Clamp Type

A (mm)

Shape

Workholding

Fixing Components

Indexa

FC31 - Ground Dowel Bolt
Material: Medium Carbon Steel EN19B.
Hardness: HRC 32 - 38.

FC31 - Ground Dowel Bolt

FC31, Ground Dowel Bolt, M12 x 65mm, Carbon Steel

Toggle Clamps

Atlas Workholders

Atlas? Workholding AP200 Push Pull Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 200Kg. 
Spindle thread: M8 x 1.25
Handle Movement: 150.
Handle position: 45 extended.
Flat flanged base.
Weight: 330g

For all dimensional specifications please refer to our catalogue.

The straight line action gives these plunger-style clamps extremely high loading capacities whilst maintaining compactness. These clamps also lock in the open position which allows a 'pull' to be exerted (for instance, in use with foam moulds). All models have tapped spindles for use with adjustable spindles.

Push Pull Industrial Toggle Clamps

P200-F45 BASE MOUNTED PUSH PULL CLAMP

SU25 - Step Block
Material: Medium Carbon Steel.
Hardness: HRC 32 - 36.
Surface Finish: Black Oxide.

SU25 - Step Block

SU25, Step Block, 32 x 59mm, Carbon Steel, Black Oxide, 2 Piece

‘U’ Bar (Adjustable) Type
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator ‘down-time’ during all stages of production.
Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

Vertical Industrial Toggle Clamp

V150FA 'U' BAR ADJUSTABLE VERTICAL CLAMP

FC40 - T-Slot Bolt
Material: Medium Carbon Steel. 
Hardness:  HRC 32 - 38.
Surface Finish: Black Oxide.

FC40 - T-Slot Bolt

FC401275 M12x75mm T-SLOT BOLT

Clamping Components

CC06 - Tapped End Plain Clamp
For use with various knobs, jack screws, clamps and pads.
Material: Medium Carbon Steel.
Heat Treated To: HRC 32 - 38.
Surface Finish: Black Oxide.

 CC06 - Tapped End Plain Clamp

CC06 80x38mm Tapped End Plain Clamp

Atlas? Workholding AH80-FA Horizontal Industrial Toggle Clamp.

Capacities:
Holding capacity: 80kg 
Movement: handle: 60. bar: 85.
Adjustable ''U'' bar type. 
Tipped spindle M6.
Flat flanged base.
Weight: 130g

For all dimensional specifications please refer to our catalogue.

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in eight sizes for general application in areas where a lower profile is required. Force applied downwards 90° to bar.

Horizontal Industrial Toggle Clamps

H80-FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

Brauer

Features: Comfortable, cushioned PVC orange handle grips. With flanged base and fixed position spindle.
Specification: The main components are of zinc plated and passivated steel. 
Rivets are of stainless steel, which burnishes and work-hardens with use.

Pull-Back Clamp (Toggle G-Clamp)

TC79 TOGGLE 'G' CLAMP

Clamping Sets

Sherwood

Efficiently tackle T-Slot clamping challenges with the T-Slot Clamping Kit, offering precision solutions for diverse applications. Crafted from durable S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel and heat-treated for strength, it ensures reliable performance. The manganese phosphate finish enhances wear resistance, and its organized plastic case facilitates convenient storage and transport.

Features and Benefits
• Time-saving T-Slot Clamping Kit for efficient setups
• Components made from robust S45C (JIS)/CK45 (DIN) carbon steel
• Heat-treated for strength with HRC 28-32 hardness
• Manganese phosphate surface finish for enhanced wear resistance
• Supplied in a durable plastic case for organized storage and easy transport

Typical Applications:
• Efficient setups for T-Slot clamping
• Industrial machining and manufacturing processes
• Versatile use in various work holding applications


Contents:  
Engineers Studs (4 off each): 75, 100, 125, 150, 175 and 200mm long. 
Step Blocks (4 off each): 29, 45 and 98mm high. 
Step Clamps (2 off each): 64, 100 and 150mm long. 
Nuts Extension 4 off Flanged 6 off T- slot 6 off.

T-Slot Clamping Kits

TK16 M16-18MM T-SLOT CLAMPING KIT (58-PC)

Atlas? Workholding AL900-FU Latch Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 900kg. 
Drawing Movement: 80mm.
Drawing Adjustment: 23.8mm. 
Flat flanged base.
Weight: 650g

For all dimensional specifications please refer to our catalogue.

Suitable for sealing chamber doors or mould closures. The latched bolts are threaded to allow easy adjustment and provide positive connection with latch plate.

Latch Type Toggle Clamps

L900-FU LATCH TYPE TOGGLE CLAMP

Atlas? Workholding AH217-FA Horizontal Industrial Toggle Clamp.

Capacities:
Holding capacity: 217kg 
Movement: handle: 65. bar: 90.
Adjustable ''U'' bar type. 
Tipped spindle M8.
Flat flanged base.
Weight: 312g

For all dimensional specifications please refer to our catalogue.

H217-FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

Ganter

One piece and threaded over all knurled screws DIN 464 are produced from is full length.

Steel visible face fine turned blackened


Ganter Griff Standard Parts

DIN464-M6-12, Thumb Screw, M6 - M20, Stainless Steel

CC12 - Adjustable Clamp
Low profile clamp that keeps top surfaces clear for machining. Ideal for rough or finished parts.
Material: Medium Carbon Steel.
Hardness: Jaw Only: HRC 38.
Surface Finish: Black Oxide.
Jaws: Surface treated with high frequency quenching.

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts.

Features and Benefits
• Low profile clamp that keeps top surfaces clear for machining
• Ideal for rough or finished parts
• Black oxide finish for increased durability

Specifications
• Material: Medium carbon steel
• Hardness: Jaw only: HRC 38
• Surface finish: Black Oxide
• Jaws: Surface treated with high frequency quenching

Typical Applications
• Machining 
• Metal

CC12 Adjustable Clamps

CC12 105x35x30mm Serrated Adjustable Clamp

CC13 - Adjustable Stepped Clamp
Low profile clamp for holding thin parts and keeping top surfaces clear for machining.
Material: Medium Carbon Steel.
Heat Treated To: hrc 38.
Surface Finish: Black Oxide.
Jaws: Surface treated with high frequency quenching.

CC13 - Adjustable Stepped Clamp

CC13 72x25x8mm Serrated Adjustable Stepped Clamp

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in eight sizes for general application in areas where a lower profile is required. Force applied downwards 90° to bar.

**Single mounting centre hole 13mm diameter for ‘Tee’ bolt mounting

Horizontal Industrial Toggle Clamp

H227FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

Atlas? Workholding AH20-FA Horizontal Industrial Toggle Clamp

Capacities:
Holding capacity: 30kg 
Movement: handle: 88. bar: 80.
Adjustable ''U'' bar type. 
Tipped spindle M6.
Flat flanged base.
Weight: 100g

For all dimensional specifications please refer to our catalogue.

H20-FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

TK10 M10-12MM T-SLOT CLAMPING KIT (58-PC)

The Atlas 58 Pieces Metric Sets are precision-engineered to address a wide range of clamping challenges and streamline setup. Crafted to exacting standards, these sets feature forged and hardened step clamps along with high-quality steel step blocks, ensuring robust performance. All components, excluding the studs, undergo heat treatment and receive a black oxide finish for enhanced durability. Designed to accommodate various metric and imperial T-Slot widths, these sets come in steel racks that offer easy wall-mounting or attachment to workbenches, providing efficient storage solutions. The M16 set further adds versatility with its wooden box. Elevate your clamping efficiency with Atlas Metric Sets, offering reliability and precision for diverse clamping needs.

Features & Benefits
• Designed to save set up time and solve most clamping problems
• All step clamps are forged and hardened & the step blocks are made from high quality steel for increased productivity
•  All components (except studs) are heat treated and finished in black oxide coating for enhanced performance
• Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box)
• Available to suit a full range of metric T-Slot widths for a wide range of use

Typical Applications
• Workholding

Notes
• Range of sizes available

T-Slot Steel Machine Metric Clamping Set (58 Pcs)

20MMXM16 T-SLOT MACHINE CLAMP SET

58 Pieces Inch Sets  (Quantity of each component part given in brackets)
Designed to save set up time and solve most clamping problems.  Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide.  Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

T-Slot Steel Clamping Sets - Inch

T-Slot Clamping Set, Inch, 1/2in.UNC, Steel, Set Of 58

Atlas? Workholding AL320-FU Latch Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 320kg. 
Drawing Movement: 45mm.
Drawing Adjustment: 9.6mm. 
Flat flanged base.
Weight: 225g

For all dimensional specifications please refer to our catalogue.

L320-FU LATCH TYPE TOGGLE CLAMP

Rack Clamps

Carver Clamps

For all dimensional specifications please refer to our catalogue.

Carver Rack Clamps are designed to cope with the toughest of engineering requirements, especially in fabrication, welding and maintenance. Consisting of a J shape notched bar and sliding jaw. Finished in a bright orange epoxy coating for durability. 

No long screws to bend, or critical working parts exposed to weld spatter. The action of tightening the clamps does not impose rotation on the workpiece and the jaws may be reversed and the clamp used in reverse action.

Features and benefits
• J shape jaw for secure and easy clamping
• Anti-splatter shield protects the adjustment screw from weld splatter damage
• Spring loaded jaw mechanism holds jaw in position when pressure is removed
• Tightening action will not rotate work-piece for complete control
• Epoxy coating for long lasting durability
• Available in standard to heavy duty variations

Typical Applications
• Welding
• Fabrication
• Maintentance


T321-250, Standard Duty Long Reach, Rack Clamps, 360mm

Contents:  Engineers Studs (4 off each): 75, 100, 125, 150, 175 & 200mm long. Step Blocks (4 off each): 28, 35 & 98mm high. Step Clamps (2 off each): 64, 100 & 150mm long. Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Fixturing

Indexa

FC31, Ground Dowel Bolt, M12 x 65mm, Carbon Steel

Atlas Workholders

P200-F45 BASE MOUNTED PUSH PULL CLAMP

3 Variations

Indexa

SU25, Step Block, 32 x 59mm, Carbon Steel, Black Oxide, 2 Piece

6 Variations

Indexa

V150FA 'U' BAR ADJUSTABLE VERTICAL CLAMP

11 Variations

Indexa

FC401275 M12x75mm T-SLOT BOLT

22 Variations

Indexa

CC06 80x38mm Tapped End Plain Clamp

8 Variations

Atlas Workholders

H80-FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

5 Variations

Brauer

TC79 TOGGLE 'G' CLAMP

Sherwood

TK16 M16-18MM T-SLOT CLAMPING KIT (58-PC)

Atlas Workholders

L900-FU LATCH TYPE TOGGLE CLAMP

3 Variations

Atlas Workholders

H217-FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

5 Variations

Ganter

DIN464-M6-12, Thumb Screw, M6 - M20, Stainless Steel

2 Variations

Indexa

CC12 105x35x30mm Serrated Adjustable Clamp

6 Variations

Indexa

CC13 72x25x8mm Serrated Adjustable Stepped Clamp

4 Variations

Indexa

H227FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

11 Variations

Atlas Workholders

H20-FA 'U' BAR ADJUSTABLE HORIZONTAL CLAMP

5 Variations

Sherwood

TK10 M10-12MM T-SLOT CLAMPING KIT (58-PC)

Sherwood

20MMXM16 T-SLOT MACHINE CLAMP SET

5 Variations

Atlas Workholders

T-Slot Clamping Set, Inch, 1/2in.UNC, Steel, Set Of 58

4 Variations

Atlas Workholders

L320-FU LATCH TYPE TOGGLE CLAMP

3 Variations

Carver Clamps

T321-250, Standard Duty Long Reach, Rack Clamps, 360mm

16 Variations

Indexa

T-Slot Clamping Kit, Metric, M14, Non-Alloy Carbon Steel, Set Of 58

5 Variations

Atlas Workholders

T-Slot Clamping Set, Inch, 3/8in. UNC, Steel, Set of 58

4 Variations

Atlas Workholders

T-Slot Clamping Set, Inch, 5/8in. UNC, Steel, Set of 58

4 Variations

Indexa

T-Slot Clamping Kit, Metric, M16, Non-Alloy Carbon Steel, Set Of 58

5 Variations

Key Information

Policies