Inserts & Blades

Explore our wide selection of high-quality inserts and blades for cutting tools at Cromwell UK. Find the right inserts and blades for your cutting needs.

Inserts and Blades | Cutting Tools | Cromwell UK

Cutting Tools

blade_heightmm

blade_lengthmm

blade_style

blade_type

coolant_delivery

cutting_application

cutting_direction

cutting_location

depth_of_cutmm

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

maximum_grooving_widthmm

minimum_grooving_widthmm

number_of_pockets

radius_type

series

widthmm

brand

categoryId

stockStatus

rangeable_corner_radiusmm

newProduct

Parting & Grooving

Parting Inserts

Iscar

Basic design of the "C" chipformer with higher deflector and smaller T-land, most suitable in grade IC5400 for general stainless steel applications for medium to high feeds. Suitable also for high alloy steel.

TAG Insert Features
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and pocket life
• Provides a solution to the problem of inserts being pulled out during retraction

Insert Grade IC1030
(P30-P45)(M25-M40) 
PVD 	TiAlN, TiN coated insert recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. 

TAG N-MF Groove Turn And Parting Insert Grade 1030

TAG N3MF INSERT GRADE IC1030

Single-Ended inserts for high feed parting and grooving. First choice for the parting of bars, hard materials and tough applications. A positive rake, negative land and shoulders, provides extra cutting-edge strength, suitable for very high feeds. 

TAG Insert Features
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and pocket life
• Provides a solution to the problem of inserts being pulled out during retraction

Insert Grade IC830
(P20-P40)(M25-M35)(S25-S35)
PVD 	TiAlN/AlTiN+TiN  coated insert with high toughness and wear resistance, recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel 


TAG N-HF Grooving And Parting Insert Grade IC830

TAG N4HF Grooving And Parting Insert Grade IC830

TAG N4MF INSERT GRADE IC1030

TAG N5HF Grooving And Parting Insert Grade IC830

Grooving Inserts

First choice for soft materials, parting of tubes, small diameters and thin walled parts. Cutting edge with positive rake. General application on low carbon steel, alloy steel, austenitic stainless steel.

TiALN PVD coated grade giving very high toughness for interrupted cutting. Excellent notch wear and built-up edge resistance. Low to medium speed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC908 (P15-P30, M20-M30, K20-K30)

DGL 1001J-8D INSERT GRADE IC908

PVD coated roughing grade, interrupted cutting and high resistance to mechanical and thermal shock. Suitable for low speed, high feed applications involving carbon, alloy and stainless steels.

Features and Benefits
• High resistance to mechanical and thermal shock
• PVD TiCN coating for greater durability
• Ideal for low speed and high feed applications

Typical Applications
• Roughing 
• Carbon steel
• Alloy steel
• Stainless steel

Iscar DO-GRIP Parting & Grooving Inserts - IC328 (P25-P50, M30-M50)

DGL 1400JS-15D INSERT GRADE IC328

DGL 1402J-8D INSERT GRADE IC328

Do-Grip, Grooving Insert, DGL 2200JS-6D, Grade IC328

DGL 2200JS-6D INSERT GRADE IC908

PVD coated for semi-roughing and interrupted cutting medium speed, high feed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC354 (P20-P40, M10-M30)

DGL 2200JS-15D INSERT GRADE IC354

Do-Grip, Grooving Insert, DGL 2202J-6D, Grade IC328

Do-Grip, Grooving Insert, DGL 2202J-6D, Grade IC354

DGL 2202J-6D INSERT GRADE IC908

DGL 3100JS-6D INSERT GRADE IC328

DGL 3100JS-15D INSERT GRADE IC328

DGL 3100JS-15D INSERT GRADE IC354

DGL 3100JS-15D INSERT GRADE IC908

DGR/L-C DGRC/LC-C: First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting edge strength at medium-to-high feeds. 

Features and Benefits
• Extra cutting edge strength for use with medium to high feed applications
• P40 substrate provides high toughness
• A thin PVD coated TiCN layer helps reduce the effects of wear and heat

Typical Applications
• Parting
• Grooving
• Steel 
• Alloy steel
• Stainless steel

Standards
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)

DGR/L-C DGRC/LC-C Inserts - Grade IC354

DGL 3102C-6D INSERT GRADE IC354

DGR/L-C DGRC/LC-C: First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with nagative land and shoulders, provides extra cutting edge strength. Medium-to-high feeds. 

Grade: IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN 

IC20 (K10-K20).
Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

Grade: IC328
A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.
ISO Range - P/M/K: (P25-P40)(M30-M40)
ISO Range - H/S/N: (S20-S30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

DGR/L-C DGRC/LC-C Inserts

Do-Grip, Grooving Insert, DGL 3102J-6D, Grade IC20

DGL 3102J-6D INSERT GRADE IC354

Do-Grip, Grooving Insert, DGL 3102J-6D, Grade IC908

DGL 3102J-15D INSERT GRADE IC328

IC20 (K10-K20).
Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

Iscar DO-GRIP Parting & Grooving Inserts - IC20 (K10-K20)

DGL 4003J-4D INSERT GRADE IC20

DGL 4003J-4D INSERT GRADE IC328

DGL 4003J-4D INSERT GRADE IC354

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Inserts & Blades

Iscar

TAG N3MF INSERT GRADE IC1030

3 Variations

Iscar

TAG N4HF Grooving And Parting Insert Grade IC830

3 Variations

Iscar

TAG N4MF INSERT GRADE IC1030

3 Variations

Iscar

TAG N5HF Grooving And Parting Insert Grade IC830

3 Variations

Iscar

DGL 1001J-8D INSERT GRADE IC908

20 Variations

Iscar

DGL 1400JS-15D INSERT GRADE IC328

36 Variations

Iscar

DGL 1402J-8D INSERT GRADE IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGL 2200JS-6D, Grade IC328

36 Variations

Iscar

DGL 2200JS-6D INSERT GRADE IC908

20 Variations

Iscar

DGL 2200JS-15D INSERT GRADE IC354

15 Variations

Iscar

Do-Grip, Grooving Insert, DGL 2202J-6D, Grade IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGL 2202J-6D, Grade IC354

15 Variations

Iscar

DGL 2202J-6D INSERT GRADE IC908

20 Variations

Iscar

DGL 3100JS-6D INSERT GRADE IC328

36 Variations

Iscar

DGL 3100JS-15D INSERT GRADE IC328

36 Variations

Iscar

DGL 3100JS-15D INSERT GRADE IC354

15 Variations

Iscar

DGL 3100JS-15D INSERT GRADE IC908

20 Variations

Iscar

DGL 3102C-6D INSERT GRADE IC354

2 Variations

Iscar

Do-Grip, Grooving Insert, DGL 3102J-6D, Grade IC20

2 Variations

Iscar

DGL 3102J-6D INSERT GRADE IC354

15 Variations

Iscar

Do-Grip, Grooving Insert, DGL 3102J-6D, Grade IC908

20 Variations

Iscar

DGL 3102J-15D INSERT GRADE IC328

36 Variations

Iscar

DGL 4003J-4D INSERT GRADE IC20

13 Variations

Iscar

DGL 4003J-4D INSERT GRADE IC328

36 Variations

Iscar