Inserts & Blades

Explore our wide selection of high-quality inserts and blades for cutting tools at Cromwell UK. Find the right inserts and blades for your cutting needs.

Inserts and Blades | Cutting Tools | Cromwell UK

Cutting Tools

blade_heightmm

blade_lengthmm

blade_style

blade_type

coolant_delivery

cutting_application

cutting_direction

cutting_location

depth_of_cutmm

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

maximum_grooving_widthmm

minimum_grooving_widthmm

number_of_pockets

radius_type

series

widthmm

brand

categoryId

stockStatus

rangeable_corner_radiusmm

newProduct

Parting & Grooving

Grooving Inserts

Iscar

First choice for soft materials, parting of tubes, small diameters and thin walled parts. Cutting edge with positive rake. General application on low carbon steel, alloy steel, austenitic stainless steel.

TiALN PVD coated grade giving very high toughness for interrupted cutting. Excellent notch wear and built-up edge resistance. Low to medium speed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC908 (P15-P30, M20-M30, K20-K30)

DGL 4003J-4D INSERT GRADE IC908

PVD coated roughing grade, interrupted cutting and high resistance to mechanical and thermal shock. Suitable for low speed, high feed applications involving carbon, alloy and stainless steels.

Features and Benefits
• High resistance to mechanical and thermal shock
• PVD TiCN coating for greater durability
• Ideal for low speed and high feed applications

Typical Applications
• Roughing 
• Carbon steel
• Alloy steel
• Stainless steel

Iscar DO-GRIP Parting & Grooving Inserts - IC328 (P25-P50, M30-M50)

Do-Grip, Grooving Insert, DGN 1402J, Grade IC328

PVD coated for semi-roughing and interrupted cutting medium speed, high feed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC354 (P20-P40, M10-M30)

DGN 1402J INSERT GRADE IC354

Do-Grip, Grooving Insert, DGN 1402J, Grade IC908

DGN 1502J INSERT GRADE IC908

Parallel wiper design for improved flatness and surface finish. Replaces existing HSS blades. Low cutting force. For low to medium feed rates.

PVD coated roughing grade, interrupted cutting and high resistance to mechanical and thermal shock. Low speed, high feed. Suitable for use on carbon, alloy and stainless steels.

Iscar DO-GRIP Parting & Grooving Inserts - IC328 (P25-P50, M30-M40)

DGN 1900WP INSERT GRADE IC328

First choice for the parting of bars, hard materials and tough applications. A positive rake single cavity with negative hand and shoulders, provides extra cutting-edge strength. Medium to low feeds.

Do-Grip, Grooving Insert, DGN 2002C, Grade IC328

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A hard, fine grain substrate with excellent chipping resistance
• New TiAlN PVD coating for added durability
• Provides high wear and oxidation resistance
• Recommended for a wide range of materials applications and machining conditions

Specifications
• Grade: IC908
• ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
• ISO Range - H/S/N: (H10-H20)(S10-S25)
• Grade or Coating Type: PVD
• Coating Layers: TiAlN

Typical Applications
• Parting
• Grooving

Iscar DO-GRIP Parting & Grooving Inserts

Do-Grip, Grooving Insert, DGN 2002C, Grade IC908

DGN 2200JS INSERT GRADE IC328

IC20 (K10-K20).
Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

Iscar DO-GRIP Parting & Grooving Inserts - IC20 (K10-K20)

Do-Grip, Grooving Insert, DGN 2202C, Grade IC20

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Features and Benefits
• A thin PVD coated TiCN layer on a P40 substrate
• High toughness and durability
• For general applications in parting and grooving steel at medium to high speeds

Specifications
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)
• Grade or Coating Type: PVD
• Coating Layers: TiCN

Typical Applications
• Parting
• Grooving
• Steel 
• Steel alloys
• Stainless streel


Iscar DO-GRIP Parting & Grooving Inserts Grade IC354

DGN 2202C INSERT GRADE IC 354

Do-Grip, Grooving Insert, DGN 2202C, Grade IC908

Do-Grip, Grooving Insert, DGN 2202J, Grade IC20

Do-Grip, Grooving Insert, DGN 2202J, Grade IC328

Do-Grip, Grooving Insert, DGN 2202J, Grade IC354

A chipformer for use at low feeds. Recommended for CIN alloys and low carbon steel, especially in the bearing industry and on similar, problem materials. Narrow chipformer design ensures short, deformed chips, and gives improved performance. Recommended for bearing materials.

DGN 2202UT INSERT GRADE IC908

DGN 2400WP INSERT GRADE IC328

Do-Grip, Grooving Insert, DGN 3002Z, Grade IC908

Do-Grip, Grooving Insert, DGN 3100JS, Grade IC328

Do-Grip, Grooving Insert, DGN 3102J, Grade IC328

Do-Grip, Grooving Insert, DGN 4003C, Grade IC20

DGN 4003J INSERT GRADE IC 20

Do-Grip, Grooving Insert, DGN 4003J, Grade IC328

DGN 4003J INSERT GRADE IC354

DGN/DGNC/DGNM-C : Used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. DGNC - with coolant holes, DGNM - single ended for very deep applications. 

Grade: IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Grade: IC907
A tough sub-micron substrate, TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.
ISO Range - P/M/K: (P10-P30)(M05-M20)(K15-K30)
ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N20)
Grade or Coating Type: PVD
Coating Layers: TiAlN+TiN

Grade: IC308
A tough sub-micron PVD coated grade. Suitable forlow to medium cutting speed. Designed for machining of heat resistant alloys, austenitic stainless steel, hard materials and carbon steel at interrupted cut and unfavorable conditions.
ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30)
ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC328
A thin PVD coated TiCN layer on a P45-K40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.
ISO Range - P/M/K: (P25-P40)(M30-M40)
ISO Range - H/S/N: (S20-S30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade: IC808
A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.
ISO Range - P/M/K: (P15-P30)(M20-M30)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN/AlTiN+TiN 

DGN 4003UT INSERT GRADE IC328

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Inserts & Blades

Iscar

DGL 4003J-4D INSERT GRADE IC908

20 Variations

Iscar

Do-Grip, Grooving Insert, DGN 1402J, Grade IC328

36 Variations

Iscar

DGN 1402J INSERT GRADE IC354

15 Variations

Iscar

Do-Grip, Grooving Insert, DGN 1402J, Grade IC908

20 Variations

Iscar

DGN 1502J INSERT GRADE IC908

20 Variations

Iscar

DGN 1900WP INSERT GRADE IC328

3 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2002C, Grade IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2002C, Grade IC908

10 Variations

Iscar

DGN 2200JS INSERT GRADE IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202C, Grade IC20

13 Variations

Iscar

DGN 2202C INSERT GRADE IC 354

6 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202C, Grade IC908

10 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC20

13 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGN 2202J, Grade IC354

15 Variations

Iscar

DGN 2202UT INSERT GRADE IC908

10 Variations

Iscar

DGN 2400WP INSERT GRADE IC328

3 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3002Z, Grade IC908

10 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3100JS, Grade IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGN 3102J, Grade IC328

36 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003C, Grade IC20

13 Variations

Iscar

DGN 4003J INSERT GRADE IC 20

13 Variations

Iscar

Do-Grip, Grooving Insert, DGN 4003J, Grade IC328

36 Variations

Iscar

DGN 4003J INSERT GRADE IC354

15 Variations

Iscar