Parting Inserts

Cutting Tools

cutting_application

cutting_direction

cutting_location

depth_of_cutmm

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

radius_type

series

widthmm

brand

categoryId

stockStatus

rangeable_corner_radiusmm

Parting & Grooving

Inserts & Blades

Iscar

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

TAG N-J/JS/JT 
Parting and grooving inserts
Single-ended insert For Parting - With a vastly improved clamping method.

Features and Benefits 
• Incredibly rigid clamping in a tangentially oriented pocket
• Allows machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts - great for interrupted cuts
• Offers a free, unobstructed chip flow - since there is no upper jaw like in other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG N-J/JS/JT Parting & Grooving Inserts Grade IC808

TAG N3J INSERT GRADE IC80 8

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

Parting and Grooving Single-Ended Inserts for Parting Bars, Hard Materials and 
Tough Applications. The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates providing excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow
• Tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

Standards
• Grade: IC808 

Typical Applications
• Parting
• Grooving

Notes
(1) Larger corner radii for interrupted cut and high feed applications
(2) Tolerance for W<6 mm = ±0.05. For W>6 mm = ±0.10

TAG N-C/W Parting & Grooving Inserts Grade IC808

TAG N3C INSERT GRADE IC808

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

TAG N-J/JS/JT : First choice for soft materials, alloy steel and austenitic stainless steel. Parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake used at low-to-medium feeds. The JS-type has sharp corners. 70% more productivity, tangentially clamped, single-ended parting system
ISCAR's new, single-ended insert for parting with an improved clamping method.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow, since there is no upper jaw
• The combination of tangential clamping and free chip flow results in improved tool and insert lifetime
• Provides a solution to the problem of inserts being pulled out during retraction

Specifications
• Grade: IC830
• A 'SUMO TEC' AlTiN+TiN PVD coated grade
• ISO Range - P/M/K: (P20-P40)(M25-M35)
• ISO Range - H/S/N: (S15-S30)
• Grade or Coating Type: PVD
• Coating Layers: AlTiN+TiN

Typical Applications
• Parting
• Stainless steels
• Steel

TAG N-J /JS/JT Parting And Grooving Inserts Grade IC830

TAG N3J INSERT GRADE IC83 0

Sandvik Coromant

R151.2 T-MaxⓇ Q-Cut Parting Inserts 

Insert Grade 1125

R151.2 T-MaxⓇ Q-Cut Parting Inserts Grade 1125

R151.2-200-08-5F INSERT GRADE 1125

R151.2-300-05-5E INSERT GRADE 1125

GFN SELF-GRIP parting and grooving inserts are self locking making them ideal for parting and grooving applications. Featuring a positive rake, single cavity and negative land and shoulders they provide extra cutting strength in medium to high feeds. Their PVD coating helps reduce their susceptibility to wear and heat. 

Features and Benefits
• Self locking for greater stability
• Positive rake and single cavity for greater chip flow
• Negative land and shoulders for greater strength
• PVD coating helps reduce wear and heat

Standards
• IC354 (P20 - P40, M10 - M30)
• PVD coated 
• Medium speed - high feed

Typical Applications
• Parting
• Grooving 
• Carbon steel
• Alloy steel
• Stainless steels

GFN SELF-GRIP Parting And Grooving Inserts Grade IC354

GFN-3 INSERT GRADE IC354

N151. 2 T-MaxⓇ Q-Cut parting inserts feature a sturdy construction with a PVD TiAlN  coating for increased heat and wear resistance

Features and Benefits
• Grade 1125 construction for finishing applications
• PVD TiAlN  coating for heat and wear resistance
• 4G chipbreaker for effective chip control


N151. 2  T-MaxⓇ Q-Cut Parting Insert Grade 1125

N151.2-300-4E INSERT GRADE 1125

GIP-E : Precision, double-ended inserts for turning and grooving. P-type chipformer, medium-to-high feeds. 

Grade : IC20
Uncoated carbide grade.
ISO Range - P/M/K	(M10-M25)(K10-K20)
ISO Range - H/S/N 	(H05-H15)(S05-S20)(N05-N25)
Grade or Coating Type: UN-COATED
Coating Layers: Uncoated 

Grade : IC328
ISO Range - P/M/K	(P25-P40)(M30-M40)
ISO Range - H/S/N 	(S20-S30)
Grade or Coating Type	PVD
Coating Layers 	TiCN 

Grade : IC808
Recommended for a very wide range of materials.
ISO Range - P/M/K	(P15-P30)(M20-M30)
ISO Range - H/S/N 	(H10-H20)(S10-S25)
Grade or Coating Type	PVD
Coating Layers 	TiAlN/AlTiN+TiN 

Grade : IC908
Machining conditions.
ISO Range - P/M/K	(P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N 	(H10-H20)(S10-S25)
Grade or Coating Type	PVD
Coating Layers 	TiAlN

Grade : IC830
High toughness and wear resistance.
ISO Range - P/M/K	(P20-P40)(M25-M35)
ISO Range - H/S/N 	(S15-S30)
Grade or Coating Type	PVD
Coating Layers 	AlTiN+TiN

Grade : IC8250
High toughness and wear resistance.
ISO Range - P/M/K	(P10-P35)(M05-M20)
ISO Range - H/S/N 	
Grade or Coating Type	CVD
Coating Layers 	TiCN+Al2O3+TiN 

Grade : IC635
For low speed, high feed and unfavorable conditions.
ISO Range - P/M/K  	(P30-P50)(M20-M40)  
ISO Range - H/S/N   	 
Grade or Coating Type  	CVD  
Coating Layers   	TiN+TiC+TiN  

GIP-E CUT-GRIP Profiling And Grooving Inserts Grade IC20

GIP-3.00E-0.40 INSERT GRADE IC20

Parting Inserts for the GTN System feature a thin PVD coated TiCN layer on a P40 substarte. With high toughness they are ideal for general applications in parting and grooving steel, alloy and stainless steel at medium to high cutting speeds.

Features and Benefits
• High toughness for applications involving steel and steel alloys
• PVD TiCN layer for increased resistance to heat and wear

Standards
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)


GTN SELF-GRIP Parting Inserts Grade IC354

GTN-3 INSERT GRADE IC354

Parting Inserts for the GTN System.

Grade Name: IC20
Insert Material: CARBIDE - UNCOATED
ISO Range: K10-20 N05-25 S05-20 H05-15
ANSI Range: C2-C3
Grade Description: 'An uncoated carbide grade. Used for semi-finishing, finishing and semi-roughing of aluminum, cast iron and stainless steel. Used at low to medium speeds and feeds.'

Grade Name: IC54
Insert Material: CARBIDE - UNCOATED
ISO Range: P40
ANSI Range: C5
Grade Description: 'Suitable for milling, turning and planing at cutting speeds with large feeds; for machining in unfavorable conditions; permits use of sharp positive angles. Workpiece materials: steel, steel castings with cavities, austenitic stainless steel, stainless steel castings.'

Grade Name: IC328
Insert Material: CARBIDE - PVD COATED
ISO Range: P25-50 M30-40 S25-30
ANSI Range: C5-C6 C2-C3
Coating Description: TiN/TiCN
Grade Description: 'A TiN/TiCN PVD coated tough grade. Used for milling, grooving, parting and drilling a wide range of workpiece materials, at low to medium cutting speeds.'

Grade : IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade : IC50M
Recommended for milling of steel, for semifinishing, semiroughing and roughing with medium or largechip sections and machining in unfavorable conditions.
ISO Range - P/M/K: (P20-P30)(M25-M40)  
Grade or Coating Type: UN-COATED  
Coating Layers: Uncoated

GTN SELF-GRIP Parting Inserts Grade IC54

GTN-3 INSERT GRADE IC54

N151.2-300-5E INSERT GRADE 1125

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

A tough submicron substrate improved  TiAIN PVD coated grade for better chip 
flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

Features and Benefits
• Tough submicron substrate for greater tool hardness
• Excellent notch wear and built-up edge resistance
• TiAIN PVD coated for better chip flow, heat and wear resistance

Typical Applications
• Parting
• Grooving
• Steel
• Stainless steel


TAG N-C/W Parting & Grooving Inserts Grade IC830

TAG N3C INSERT GRADE IC83 0

N151.2-250-5E INSERT GRADE 1125

N151. 2 T-MaxⓇ Q-Cut Parting Insert 

Insert Grade 235

N151. 2 T-MaxⓇ Q-Cut Parting Insert Grade 235

N151.2-300-4E INSERT GRADE 235

GFF-N: SELF-GRIP, face grooving inserts.

Grade : IC354
medium to high cutting speeds.
ISO Range - P/M/K	(P20-P40)(M10-M30)
ISO Range - H/S/N 	
Grade or Coating Type	PVD
Coating Layers 	TiCN 

Grade : IC635
ISO Range - P/M/K	(P30-P50)(M20-M40)
ISO Range - H/S/N 	
Grade or Coating Type	CVD
Coating Layers 	TiN+TiC+TiN 

Grade : IC656
ISO Range - P/M/K	(P20-P40)(M20-M40)
ISO Range - H/S/N 	
Grade or Coating Type	CVD
Coating Layers 	TiCN+TiC+TiN 

Grade : IC20
Uncoated carbide grade.
ISO Range - P/M/K	(M10-M25)(K10-K20)
ISO Range - H/S/N 	(H05-H15)(S05-S20)(N05-N25)
Grade or Coating Type	UN-COATED
Coating Layers 	Uncoated 

GFF SELF-GRIP Parting And Grooving Inserts Grade IC354

GFF-4N INSERT GRADE IC354

Uncoated carbide inserts are designed for grey cast iron over 220HBN, malleable cast iron, silicon aluminum and copper alloys. They are suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. The inserts have high wear resistance. They are grade IC20.

Features and Benefits
• Built for grooving and parting a variety of materials
• High wear resistance
• Uncoated carbide

Typical Applications
• Finishing and medium finishing
• Aluminium
• Brass
• Cast Iron
• Copper
• High-temperature alloys
• Stainless Steel
• Thermoplastic

GFN Parting And Grooving Inserts, Grade IC20

GFN-3 INSERT GRADE IC20

GTN-4 INSERT GRADE IC354

N151.2 T-MaxⓇ Q-Cut Parting Inserts

Insert Grade 1145

N151.2 T-MaxⓇ Q-Cut Parting Inserts Grade 1145

N151.2-250-7E INSERT GRADE 1145

QD-NG CoroCutⓇ QD Parting Inserts

Insert Grade 1125

QD-NG CoroCutⓇ QD Parting Inserts Grade 1125

QD-NG-0300-0002-CM INSERT GRADE 1125

Single-Ended inserts for high feed parting and grooving. First choice for the parting of bars, hard materials and tough applications. A positive rake, negative land and shoulders, provides extra cutting-edge strength, suitable for very high feeds. 

TAG Insert Features
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and pocket life
• Provides a solution to the problem of inserts being pulled out during retraction

Insert Grade IC808
(P15-P30)(M20-M30)(K20-K30)(H20-H30)(S10-S25)
PVD 	TiAlN/AlTiN+TiN  coated insert with a hard, fine grain substrate with excellent chipping resistance and high wear resistance. Recommended for a wide range of materials. 


TAG N-HF Grooving And Parting Insert Grade IC808

TAG N3HF Grooving And Parting Insert Grade IC808

TAG R-C  insert offer extra cutting edge strength thanks to their positive rake face with single cavity, negative land and shoulders. Ideal for use on bars, hard materials and tough parting applications.

Features and Benefits
• Enables machining at medium to high feed rates with excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow important in deep grooving and parting applications
• improved tool and insert lifespan

Typical Applications
• Parting
• Grooving

TAG R-C Parting And Grooving Inserts Grade IC808

TAG R3C-6D INSERT GRADE I C808

A thin PVD coated layer on a tough substrate,for milling, parting and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.

Features and Benefits
• Tough substrate for greater strength and hardness
• Thin PVD TiCN coated layer for greater heat and wear resistance
•  Designed to operate at low to medium cutting speeds and in unstable machining conditions

Typical Applications
• Parting
• Milling
• Grooving
• Steel 
• Stainless steel

GFN SELF-GRIP Parting And Grooving Inserts Grade IC328

GFN-3 INSERT GRADE IC328

GFN-C : First choice for the parting of bars, hard materials and tough applications. Positive rake, single cavity with a negative land and shoulders, provides extra cutting-edge strength. Medium-to-high feeds. 

IC30N Grade description: (P05 - P25).
Cermet grade for carbon steel, tool steel, alloy steel, steel casting, malleable cast iron, austenitic stainless steel, martensitic stainless steel, free cutting steel. Suitable for medium speed, medium feed and interrupted cut.

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Parting Inserts

Iscar

TAG N3J INSERT GRADE IC80 8

12 Variations

Iscar

TAG N3C INSERT GRADE IC808

10 Variations

Iscar

TAG N3J INSERT GRADE IC83 0

12 Variations

Sandvik Coromant

R151.2-200-08-5F INSERT GRADE 1125

11 Variations

Sandvik Coromant

R151.2-300-05-5E INSERT GRADE 1125

11 Variations

Iscar

GFN-3 INSERT GRADE IC354

25 Variations

Sandvik Coromant

N151.2-300-4E INSERT GRADE 1125

33 Variations

Iscar

GIP-3.00E-0.40 INSERT GRADE IC20

4 Variations

Iscar

GTN-3 INSERT GRADE IC354

7 Variations

Iscar

GTN-3 INSERT GRADE IC54

2 Variations

Sandvik Coromant

N151.2-300-5E INSERT GRADE 1125

33 Variations

Iscar

TAG N3C INSERT GRADE IC83 0

10 Variations

Sandvik Coromant

N151.2-250-5E INSERT GRADE 1125

33 Variations

Sandvik Coromant

N151.2-300-4E INSERT GRADE 235

47 Variations

Iscar

GFF-4N INSERT GRADE IC354

5 Variations

Iscar

GFN-3 INSERT GRADE IC20

28 Variations

Iscar

GTN-4 INSERT GRADE IC354

7 Variations

Sandvik Coromant

N151.2-250-7E INSERT GRADE 1145

3 Variations

Sandvik Coromant

QD-NG-0300-0002-CM INSERT GRADE 1125

7 Variations

Iscar

TAG N3HF Grooving And Parting Insert Grade IC808

3 Variations

Iscar

TAG R3C-6D INSERT GRADE I C808

6 Variations

Iscar

GFN-3 INSERT GRADE IC328

10 Variations

Iscar

GFN-3 INSERT GRADE IC908

5 Variations

Iscar

GFN-4 INSERT GRADE IC354

25 Variations

Iscar