Parting Inserts

Cutting Tools

cutting_application

cutting_direction

cutting_location

depth_of_cutmm

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

radius_type

series

widthmm

brand

categoryId

stockStatus

rangeable_corner_radiusmm

Parting & Grooving

Inserts & Blades

Iscar

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

TAG N-J/JS/JT 
Parting and grooving inserts
Single-ended insert For Parting - With a vastly improved clamping method.

Features and Benefits 
• Incredibly rigid clamping in a tangentially oriented pocket
• Allows machining at very high feed rates and provides excellent straightness and surface finish
• Recommended for parting large diameter parts - great for interrupted cuts
• Offers a free, unobstructed chip flow - since there is no upper jaw like in other clamping systems (very important in deep grooving and parting applications)
• The combination of tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG N-J/JS/JT Parting & Grooving Inserts Grade IC808

TAG N7JT INSERT GRADE IC808

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

These inserts are ideal for the parting of bars, use on hard materials and in tough applications. They have excellent cutting-edge strength. The inserts enable machining at very high feed rates while also providing excellent straightness and a smooth surface finish. Single-ended.

Features and Benefits
• Enable machining at very high feed rates
• Provide excellent straightness and surface finish
• Grade IC908
• Single-ended

Typical Applications
• Grooving and parting on hard materials

TAG R-C Parting & Grooving Inserts, Grade IC830

TAG R2C-6D INSERT GRADE I C830

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed. 

IC808 Grade Description: 
A tough submicron substrate improved  TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

TAG R-J/JS Parting and grooving inserts are made with a hard submicron substrate with excellent chipping resistance, combined with a 'Sumo Tec' TiAlN PVD coating providing high wear resistance.

Features and Benefits
• Rigid clamping in a tangentially oriented pocket
• Enables machining at high feed rates providing excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow, since there is no upper jaw
• Tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

Standards
• IC808 
• ISO range P/M/K: (P15-P30)(M20-M30)(K20-K30) 
• ISO range - N/S/H: (H20-H30)(S10-S25) 

Typical Applications
• Parting 
• Grooving
• Steel
• Stainless steel
• Soft metals

Notes
• Available with the familiar J- and C-Type chipformers
• Neutral and angular frontal cutting edges

TAG R-J /JS Parting And Grooving Inserts Grade IC808

TAG R-C  Parting And Grooving Inserts Grade IC928

TAG R3C-6D INSERT GRADE I C928

TAG L-C 
Parting, single-ended insert for bars, hard materials and tough parting applications.

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for  interrupted cuts. 
* Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG L-C Parting & Grooving Inserts Grade IC830

TAG L3C-15D INSERT GRADE IC830

TAG L-C 
Parting, single-ended insert for bars, hard materials and tough parting applications.

TAG Insert Features:
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for interrupted cuts.
 * Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG L-C Parting And Grooving Inserts Grade IC808

TAG L3C-15D INSERT GRADE IC808

TAG L4C-4D INSERT GRADE I C830

TAG R4C-4D INSERT GRADE I C830

TAG L4C-4D INSERT GRADE I C808

TAG R3J-15D INSERT GRADE IC808

TAG R-J/JS First choice for soft materials, alloy steel and austenitic stainless steel. Parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake used at low-to-medium feeds. The JS-type has sharp corners.

TANG-GRIP parting inserts for soft materials, tubes, small diameters and thin-walled parts.

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Grade : IC830
A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance.
ISO Range - P/M/K: (P20-P40)(M25-M35)
ISO Range - H/S/N: (S15-S30)
Grade or Coating Type: PVD
Coating Layers: AlTiN+TiN

TAG R-J/JS Parting & Grooving Inserts Grade IC908

TAG R3J-15D INSERT GRADE IC908

TAG R/L-J/JS First choice for soft materials, alloy steel and austenitic stainless steel. Parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake used at low-to-medium feeds. The JS-type has sharp corners.

TANG-GRIP parting inserts for soft materials, tubes, small diameters and thin-walled parts.

Grade: IC908
A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.
ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40)
ISO Range - H/S/N: (H10-H20)(S10-S25)
Grade or Coating Type: PVD
Coating Layers: TiAlN

Grade : IC830
A 'SUMO TEC' AlTiN+TiN PVD coated grade. Recommended for interrupted cut and heavy operations on stainless steel, high temperature and alloyed steel. High toughness and wear resistance.
ISO Range - P/M/K: (P20-P40)(M25-M35)
ISO Range - H/S/N: (S15-S30)
Grade or Coating Type: PVD
Coating Layers: AlTiN+TiN

TAG R-J/JS Parting & Grooving Inserts Grade IC830

TAG R3JS-15D INSERT GRADE IC830

TAG R5C-4D INSERT GRADE I C830

TAG L5C-4D INSERT GRADE I C808

TAG R-C  insert offer extra cutting edge strength thanks to their positive rake face with single cavity, negative land and shoulders. Ideal for use on bars, hard materials and tough parting applications.

Features and Benefits
• Enables machining at medium to high feed rates with excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow important in deep grooving and parting applications
• improved tool and insert lifespan

Typical Applications
• Parting
• Grooving

TAG R-C Parting And Grooving Inserts Grade IC808

TAG R5C-4D INSERT GRADE I C808

TAG L5C-4D INSERT GRADE I C830

TAG R/L-J/JS 
Parting and grooving Inserts

TAG Insert Features
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for interrupted cuts.
* Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG L-J /JS Parting And Grooving Inserts Grade IC808

TAG L5J-4D INSERT GRADE I C808

TAG L-J/JS 
Parting and grooving Inserts.

TAG Insert Features:
* Very rigid clamping in a tangentially oriented pocket.
* Enables machining at very high feed rates and provides excellent straightness and surface finish.
* Recommended for parting large diameter parts and for interrupted cuts.
* Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications.
* The combination of tangential clamping and free chip flow results in improved tool and insert life time.
* Provides a solution to the problem of inserts being pulled out during retraction.

The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

TAG L- J /JS/Parting And Grooving Inserts Grade IC830

TAG L5J-4D INSERT GRADE I C830

TAG L6C-4D INSERT GRADE I C808

TAG L6C-4D INSERT GRADE I C830

TAG L6J-4D INSERT GRADE I C808

TAG L6J-4D INSERT GRADE I C830

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

A tough submicron substrate improved  TiAIN PVD coated grade for better chip 
flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

Features and Benefits
• Tough submicron substrate for greater tool hardness
• Excellent notch wear and built-up edge resistance
• TiAIN PVD coated for better chip flow, heat and wear resistance

Typical Applications
• Parting
• Grooving
• Steel
• Stainless steel


TAG N-C/W Parting & Grooving Inserts Grade IC830

TAG N7W INSERT GRADE IC83 0

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

Parting and Grooving Single-Ended Inserts for Parting Bars, Hard Materials and 
Tough Applications. The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates providing excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow
• Tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

Standards
• Grade: IC808 

Typical Applications
• Parting
• Grooving

Notes
(1) Larger corner radii for interrupted cut and high feed applications
(2) Tolerance for W<6 mm = ±0.05. For W>6 mm = ±0.10

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Parting Inserts

Iscar

TAG N7JT INSERT GRADE IC808

12 Variations

Iscar

TAG R2C-6D INSERT GRADE I C830

6 Variations

Iscar

TAG R2JS-6D INSERT GRADE IC808

12 Variations

Iscar

TAG R3C-6D INSERT GRADE I C928

Iscar

TAG L3C-15D INSERT GRADE IC830

6 Variations

Iscar

TAG L3C-15D INSERT GRADE IC808

6 Variations

Iscar

TAG L4C-4D INSERT GRADE I C830

6 Variations

Iscar

TAG R4C-4D INSERT GRADE I C830

6 Variations

Iscar

TAG L4C-4D INSERT GRADE I C808

6 Variations

Iscar

TAG R3J-15D INSERT GRADE IC808

12 Variations

Iscar

TAG R3J-15D INSERT GRADE IC908

Iscar

TAG R3JS-15D INSERT GRADE IC830

13 Variations

Iscar

TAG R5C-4D INSERT GRADE I C830

6 Variations

Iscar

TAG L5C-4D INSERT GRADE I C808

6 Variations

Iscar

TAG R5C-4D INSERT GRADE I C808

6 Variations

Iscar

TAG L5C-4D INSERT GRADE I C830

6 Variations

Iscar

TAG L5J-4D INSERT GRADE I C808

12 Variations

Iscar

TAG L5J-4D INSERT GRADE I C830

12 Variations

Iscar

TAG L6C-4D INSERT GRADE I C808

6 Variations

Iscar

TAG L6C-4D INSERT GRADE I C830

6 Variations

Iscar

TAG L6J-4D INSERT GRADE I C808

12 Variations

Iscar

TAG L6J-4D INSERT GRADE I C830

12 Variations

Iscar

TAG N7W INSERT GRADE IC83 0

10 Variations

Iscar

TAG N7W INSERT GRADE IC80 8

10 Variations

Iscar

TAG N8C INSERT GRADE IC83 0

10 Variations