Parting Inserts

Cutting Tools

cutting_application

cutting_direction

cutting_location

depth_of_cutmm

grooving_widthmm

insert_style

iso_category_grade

manufacturer_grade

material

radius_type

series

widthmm

brand

categoryId

stockStatus

rangeable_corner_radiusmm

Parting & Grooving

Inserts & Blades

Iscar

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

These inserts are ideal for the parting of bars, use on hard materials and in tough applications. They have excellent cutting-edge strength. The inserts enable machining at very high feed rates while also providing excellent straightness and a smooth surface finish. Single-ended.

Features and Benefits
• Enable machining at very high feed rates
• Provide excellent straightness and surface finish
• Grade IC908
• Single-ended

Typical Applications
• Grooving and parting on hard materials

TAG R-C Parting & Grooving Inserts, Grade IC830

TAG R3C-15D INSERT GRADE IC830

First choice for soft materials, parting of tubes, small diameters and thin-walled parts. Cutting edge with positive rake. General applications on low carbon steel, alloy steel, austinitic stainless steel. Low-to-medium feed.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

TAG R-C  insert offer extra cutting edge strength thanks to their positive rake face with single cavity, negative land and shoulders. Ideal for use on bars, hard materials and tough parting applications.

Features and Benefits
• Enables machining at medium to high feed rates with excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow important in deep grooving and parting applications
• improved tool and insert lifespan

Typical Applications
• Parting
• Grooving

TAG R-C Parting And Grooving Inserts Grade IC808

TAG R3C-15D INSERT GRADE IC808

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC808 Grade Description:
(P15-P30/M20-M30/K20-K40/ S15-S25/N15-N25/H20-H30) SUMO TEC TiAlN PVD coated. A tough submicron substrate. For machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds. Excellent notch wear and built-up edge resistance.

Parting and Grooving Single-Ended Inserts for Parting Bars, Hard Materials and 
Tough Applications. The TAG inserts are available with the familiar J- and C-Type chipformers, with neutral and angular frontal cutting edges. The new tools are equipped with a user-friendly clamping and extraction device. The TANG-GRIP family includes square shank tools, blades and inserts in 1.4 - 9.5mm widths in the most advanced IC830 and IC808 SUMO TEC grades. The blades are in standard siuzes which fit ISCAR's standard blocks.

Features and Benefits
• Very rigid clamping in a tangentially oriented pocket
• Enables machining at very high feed rates providing excellent straightness and surface finish
• Recommended for parting large diameter parts and for interrupted cuts
• Offers a free, unobstructed chip flow
• Tangential clamping and free chip flow results in improved tool and insert life time
• Provides a solution to the problem of inserts being pulled out during retraction

Standards
• Grade: IC808 

Typical Applications
• Parting
• Grooving

Notes
(1) Larger corner radii for interrupted cut and high feed applications
(2) Tolerance for W<6 mm = ±0.05. For W>6 mm = ±0.10

TAG N-C/W Parting & Grooving Inserts Grade IC808

TAG N3C-B INSERT GRADE IC 808

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds.

IC830 Grade Description:
(P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

A tough submicron substrate improved  TiAIN PVD coated grade for better chip 
flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance.

Features and Benefits
• Tough submicron substrate for greater tool hardness
• Excellent notch wear and built-up edge resistance
• TiAIN PVD coated for better chip flow, heat and wear resistance

Typical Applications
• Parting
• Grooving
• Steel
• Stainless steel


TAG N-C/W Parting & Grooving Inserts Grade IC830

GFN SELF-GRIP Parting And Grooving Inserts Grade IC354

GFN-1.6 INSERT GRADE IC35 4

A thin PVD coated layer on a tough substrate,for milling, parting and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.

Features and Benefits
• Tough substrate for greater strength and hardness
• Thin PVD TiCN coated layer for greater heat and wear resistance
•  Designed to operate at low to medium cutting speeds and in unstable machining conditions

Typical Applications
• Parting
• Milling
• Grooving
• Steel 
• Stainless steel

GFN J Parting And Grooving Inserts Grade IC328

GFN-3J INSERT GRADE IC328

GFN-3J INSERT GRADE IC354

Uncoated carbide inserts are designed for grey cast iron over 220HBN, malleable cast iron, silicon aluminum and copper alloys. They are suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. The inserts have high wear resistance. They are grade IC20.

Features and Benefits
• Built for grooving and parting a variety of materials
• High wear resistance
• Uncoated carbide

Typical Applications
• Finishing and medium finishing
• Aluminium
• Brass
• Cast Iron
• Copper
• High-temperature alloys
• Stainless Steel
• Thermoplastic

GFN Parting And Grooving Inserts, Grade IC20

GFN-3W INSERT GRADE IC20

GFR Parting And Grooving Inserts, Grade IC20

GFR-1.6JS-6D INSERT GRADE IC20

IC20 (K10-K20).
Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

GIP-3.00-0.20 INSERT GRADE IC908

Parting Inserts for the GTN System.

Grade Name: IC20
Insert Material: CARBIDE - UNCOATED
ISO Range: K10-20 N05-25 S05-20 H05-15
ANSI Range: C2-C3
Grade Description: 'An uncoated carbide grade. Used for semi-finishing, finishing and semi-roughing of aluminum, cast iron and stainless steel. Used at low to medium speeds and feeds.'

Grade Name: IC54
Insert Material: CARBIDE - UNCOATED
ISO Range: P40
ANSI Range: C5
Grade Description: 'Suitable for milling, turning and planing at cutting speeds with large feeds; for machining in unfavorable conditions; permits use of sharp positive angles. Workpiece materials: steel, steel castings with cavities, austenitic stainless steel, stainless steel castings.'

Grade Name: IC328
Insert Material: CARBIDE - PVD COATED
ISO Range: P25-50 M30-40 S25-30
ANSI Range: C5-C6 C2-C3
Coating Description: TiN/TiCN
Grade Description: 'A TiN/TiCN PVD coated tough grade. Used for milling, grooving, parting and drilling a wide range of workpiece materials, at low to medium cutting speeds.'

Grade : IC354
A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.
ISO Range - P/M/K: (P20-P40)(M10-M30)
Grade or Coating Type: PVD
Coating Layers: TiCN

Grade : IC50M
Recommended for milling of steel, for semifinishing, semiroughing and roughing with medium or largechip sections and machining in unfavorable conditions.
ISO Range - P/M/K: (P20-P30)(M25-M40)  
Grade or Coating Type: UN-COATED  
Coating Layers: Uncoated

GTN SELF-GRIP Parting Inserts Grade IC20

GTN-2 INSERT GRADE IC20

Parting Inserts for the GTN System feature a thin PVD coated TiCN layer on a P40 substarte. With high toughness they are ideal for general applications in parting and grooving steel, alloy and stainless steel at medium to high cutting speeds.

Features and Benefits
• High toughness for applications involving steel and steel alloys
• PVD TiCN layer for increased resistance to heat and wear

Standards
• Grade: IC354
• ISO Range - P/M/K: (P20-P40)(M10-M30)


GTN SELF-GRIP Parting Inserts Grade IC354

GTN-3B INSERT GRADE IC354

GTN-4 INSERT GRADE IC20

Grade Name: IC354
Insert Material: CARBIDE - PVD COATED
ISO Range: P20-40 M10-30
ANSI Range: C5-C6
Coating Description: TiN/TiCN
Grade Description: 'A TiN/TiCN PVD coated, tough grade. Used for general applications in parting and grooving carbon, alloy and stainless steel at medium to high cutting speeds.'

Grade: IC20
Used for semifinishing, finishing and semiroughing of aluminum, cast iron and stainless steel. An uncoated carbide grade.
ISO Range - P/M/K: (M10-M25)(K10-K20)
ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N25)
Grade or Coating Type: UN-COATED
Coating Layers: Uncoated

Grade: IC50M	
Recommended for milling of steel, for semifinishing, semiroughing and roughing with medium or largechip sections and machining in unfavorable conditions.
ISO Range - P/M/K: (P20-P30)(M25-M40)
Grade or Coating Type: UN-COATED
Coating Layers: Uncoated

GTR SELF-GRIP Parting Inserts Grade IC354

GTR-3-8D INSERT GRADE IC354

(Unbranded)

SCD 042-029-060 ACP5N SOLID DRILL GRADE IC908

Sandvik Coromant

N123 CoroCut® 1-2 inserts for grooving or profiling from Sandvik feature 2 cutting edges with a TM chip breaker and a durable PVD TIALN coating for prolonged tool life.

Features and Benefits
• 2 cutting edges with CM chip breaker
• Durable PVD TIALN coating for improved tool life

Specifications
• Insert size and shape: CoroCut 1-2 -size J2 
• Cutting edges: 2
• Cutting width: 2mm
• Corner radius: 0.2mm (right and left)
• Grade: 1125
• Coating: PVD TIALN 
• Chip breaker: CM 
• Cutting width upper tolerance: 0.1mm
• Cutting width lower toloerance: - 0.1mm

Typical Applications
• Turning
• Grooving
• Steel
• Stainless steel


N123 CoroCutⓇ 1-2 Insert Grade 1125

N123D2-0150-0002-CM INSERT GRADE 1125

N123 CM CoroCutⓇ 1-2 insert CoroCut® 1-2 inserts for grooving or profiling feature a hard substrate with a CVD TiCrN+Al2O3+TiN for improved toughness, heat and wear resistance. 2 cutting edges allow for increased cutting performance. 

Features and Benefits
• Hard substrate for increased toughness in cutting applications
• CVD TiCrN+Al2O3+TiN increases heat and wear resistance
• 2 cutting edges for increased cutting performance

Standards
• Insert Grade 2135

Typical Applications
• Grooving
• Profiling

N123 CoroCutⓇ 1-2 Insert Grade 2135

N123G2-0300-0002CM INSERT GRADE 2135

N151. 2 T-MaxⓇ Q-Cut parting inserts feature a sturdy construction with a PVD TiAlN  coating for increased heat and wear resistance

Features and Benefits
• Grade 1125 construction for finishing applications
• PVD TiAlN  coating for heat and wear resistance
• 4G chipbreaker for effective chip control


N151. 2  T-MaxⓇ Q-Cut Parting Insert Grade 1125

N151.2-200-20-4G INSERT GRADE 1125

N151.2  T-MaxⓇ Q-Cut Parting Insert 

Insert Grade 2135

N151.2  T-MaxⓇ Q-Cut Parting Insert Grade 2135

N151.2-250-5E INSERT GRADE 2135

N151.2  T-MaxⓇ Q-Cut Parting Insert 

Insert Grade 3020

N151.2  T-MaxⓇ Q-Cut Parting Insert Grade 3020

N151.2-300-4E INSERT GRADE 3020

N151. 2 T-MaxⓇ Q-Cut Parting Insert 

Insert Grade 235

N151. 2 T-MaxⓇ Q-Cut Parting Insert Grade 235

N151.2-300-30-5G INSERT GRADE 235

N151.2-300-30-5P INSERT GRADE 235

N151.2-400-40-5G INSERT GRADE 235

N151.2 T-MaxⓇ Q-Cut Parting Inserts

Insert Grade 1145

N151.2 T-MaxⓇ Q-Cut Parting Inserts Grade 1145

N151.2-400-5E INSERTGRADE 1145

N151.2  T-MaxⓇ Q-Cut Parting Insert 

Insert Grade H13A 

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Parting Inserts

Iscar

TAG R3C-15D INSERT GRADE IC830

6 Variations

Iscar

TAG R3C-15D INSERT GRADE IC808

6 Variations

Iscar

TAG N3C-B INSERT GRADE IC 808

10 Variations

Iscar

TAG N3C-B INSERT GRADE IC 830

10 Variations

Iscar

GFN-1.6 INSERT GRADE IC35 4

25 Variations

Iscar

GFN-3J INSERT GRADE IC328

6 Variations

Iscar

GFN-3J INSERT GRADE IC354

25 Variations

Iscar

GFN-3W INSERT GRADE IC20

28 Variations

Iscar

GFR-1.6JS-6D INSERT GRADE IC20

20 Variations

Iscar

GIP-3.00-0.20 INSERT GRADE IC908

2 Variations

Iscar

GTN-2 INSERT GRADE IC20

3 Variations

Iscar

GTN-3B INSERT GRADE IC354

7 Variations

Iscar

GTN-4 INSERT GRADE IC20

3 Variations

Iscar

GTR-3-8D INSERT GRADE IC354

3 Variations

(Unbranded)

SCD 042-029-060 ACP5N SOLID DRILL GRADE IC908

Sandvik Coromant

N123D2-0150-0002-CM INSERT GRADE 1125

22 Variations

Sandvik Coromant

N123G2-0300-0002CM INSERT GRADE 2135

4 Variations

Sandvik Coromant

N151.2-200-20-4G INSERT GRADE 1125

33 Variations

Sandvik Coromant

N151.2-250-5E INSERT GRADE 2135

14 Variations

Sandvik Coromant

N151.2-300-4E INSERT GRADE 3020

2 Variations

Sandvik Coromant

N151.2-300-30-5G INSERT GRADE 235

47 Variations

Sandvik Coromant

N151.2-300-30-5P INSERT GRADE 235

47 Variations

Sandvik Coromant

N151.2-400-40-5G INSERT GRADE 235

47 Variations

Sandvik Coromant

N151.2-400-5E INSERTGRADE 1145

3 Variations

Sandvik Coromant

N151.2-600-4E INSERT GRADE H13A