Turning Inserts

Cutting Tools

cutting_direction

cutting_edge_lengthmm

insert_size

insert_style

iso_category_grade

manufacturer_grade

material

pack_quantity

shape

brand

categoryId

stockStatus

newProduct

Turning

Yamaloy

Fits the same Internal/External Toolholders as CCGT

Insert Geometry for Finishing & Semi-finishing of Aluminium & Aluminium Alloys
Optimised edge and radius geometry.
Improved surface finish.
Improved chip control.
'G' Tolerance for high repeatability.
First choice for machining pure aluminium.
30% longer insert life compared to uncoated grade.

Grade K10C
ISO N05-N15 PVD Coated. Micrograin carbide for machining aluminium and aluminium alloys, 30% higher tool life against uncoated grade. Smooth coating and polished surface gives better chip control.

ALC Geometry 
For finishing & semi finishing of aluminium and aluminium alloys. A unique breaker design gives a sharp cutting edge and positive rake angle. Special edge preparation and surface treatment produce better surface quality and greater chip control, reduced friction and vibration. 'G' tolerance inserts for higher repeatability.

CCGX Turning Inserts 

80° Rhombic Insert

Fits the same Internal/External Toolholders as CCGT

Insert Geometry for Finishing & Semi-finishing of Aluminium & Aluminium Alloys
Optimised edge and radius geometry.
Improved surface finish.
Improved chip control.
'G' Tolerance for high repeatability.
First choice for machining pure aluminium.
30% longer insert life compared to uncoated grade.

Insert Grade K10C
ISO N05-N15 PVD Coated. Micrograin carbide for machining aluminium and aluminium alloys, 30% higher tool life against uncoated grade. Smooth coating and polished surface gives better chip control.

ALC Geometry 
For finishing & semi finishing of aluminium and aluminium alloys. A unique breaker design gives a sharp cutting edge and positive rake angle. Special edge preparation and surface treatment produce better surface quality and greater chip control, reduced friction and vibration. 'G' tolerance inserts for higher repeatability.

CCGX Turning Inserts Grade K10C

CCGX 060202-ALC, Turning Insert, Grade K10C, Carbide, 80° Rhombic

To suit: Indexa Seiki QMC QUAD Milling Cutter

CCMT Turning Inserts 

80° Rhombic Insert

Insert Grade QX500
(ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.


Chip Breaker: PM. Application: Med Cut.

CCMT Turning Inserts Grade QX500

CCMT 060204-PM, Turning Insert, Grade QX500, Cermet, 80° Rhombic

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum).

These DCGT 55° rhombic turning inserts are grade K10 (ISO K10) uncoated. Used in combination with a high rake geometry for machining aluminum, plastics and other soft non-ferrous materials. With an AL Chipbreaker suted for medium cuts of aluminium.

Features and Benefits
• Available in a variety of sizes and specifications to suit your needs
• Uncoated
• AL chipbreaker suited for medium cuts of aluminium

Typical Applications
• Used in combination with a high rake geometry for machining aluminum, plastics and other soft non-ferrous materials

DCGT Turning Inserts, Grade K10

DCGT 11T304-AL, Turning Insert, Grade K10, Carbide, 55° Rhombic

Fits the same Internal/External Toolholders as DCGT

Insert Geometry for Finishing & Semi-finishing of Aluminium & Aluminium Alloys
Optimised edge and radius geometry.
Improved surface finish.
Improved chip control.
'G' Tolerance for high repeatability.
First choice for machining pure aluminium.
30% longer insert life compared to uncoated grade.

Grade K10C
ISO N05-N15 PVD Coated. Micrograin carbide for machining aluminium and aluminium alloys, 30% higher tool life against uncoated grade. Smooth coating and polished surface gives better chip control.

ALC Geometry 
For finishing & semi finishing of aluminium and aluminium alloys. A unique breaker design gives a sharp cutting edge and positive rake angle. Special edge preparation and surface treatment produce better surface quality and greater chip control, reduced friction and vibration. 'G' tolerance inserts for higher repeatability.

DCGX Turning Inserts

55° Rhombic Inert 

Fits the same Internal/External Toolholders as DCGT

Insert Geometry for Finishing & Semi-finishing of Aluminium & Aluminium Alloys
Optimised edge and radius geometry.
Improved surface finish.
Improved chip control.
'G' Tolerance for high repeatability.
First choice for machining pure aluminium.
30% longer insert life compared to uncoated grade.

Insert Grade K10C
ISO N05-N15 PVD Coated. Micrograin carbide for machining aluminium and aluminium alloys, 30% higher tool life against uncoated grade. Smooth coating and polished surface gives better chip control.

ALC Geometry 
For finishing & semi finishing of aluminium and aluminium alloys. A unique breaker design gives a sharp cutting edge and positive rake angle. Special edge preparation and surface treatment produce better surface quality and greater chip control, reduced friction and vibration. 'G' tolerance inserts for higher repeatability.

DCGX Turning Inserts Grade K10C

DCGX 11T304-ALC, Turning Insert, Grade K10C, Carbide, 55° Rhombic

Grades:
QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Med Cut.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR8. Application: Rough.


DNMG Turning Inserts 

55° Rhombic Insert

Insert Grades QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.


Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR8. Application: Rough.


DNMG Turning Inserts Grade QX520

DNMG 150408-NF3, Turning Insert, Grade QX520, Carbide, 55° Rhombic

DNMG 150408-NR8, Turning Insert, Grade QX520, Carbide, 55° Rhombic

Grades:
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Medium.

TCGT Turning Inserts

60° Triangular Insert

Insert Grade K10
(ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

Chip Breaker: AL. Application: Medium.

TCGT Turning Inserts Grade K10

TCGT 16T304-AL, Turning Insert, Grade K10, Carbide, Triangle

TCGT 16T308-AL, Turning Insert, Grade K10, Carbide, Triangle

TCGT turning inserts feature a CVD coated substrate providing an excellent general purpose grade for medium roughing on steels, stainless and cast irons.

Features and Benefits
• CVD MT-TiCN-Al2O3-TiN coating for increased heat and wear resistance
• Tough substrate for increased cutting strength
• Versatile usage can be used in a range of applications from roughing to finishing
• PF chipbreaker for good chip flow

Typical Applications
• General purpose
• Medium roughing
• Finishing
• Steel 
• Stainless steel
• Cast iron
 Finish.

Standards
• Insert Grade QX5020
• (ISO P10-P35 M10-M30 K10-K30)


TCGT Turning Inserts Grade QX5020

TCGT 16T304-PF, Turning Insert, Grade QX5020, Carbide, Triangle

TNMG Turning Inserts

60° Trianglar Insert

Insert Grade QX5030
(ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.


Chip Breaker: NM6. Application: Med Cut.


TNMG Turning Inserts Grade QX5030

TNMG 220408-NM6, Turning Insert, Grade QX5030, Carbide, Triangle

VCGT Turning Inserts

35° Rhombic Insert

Insert Grade K10
(ISO K10) Uncoated. Used in combination with a high rake geometry for machining  Cast Iron ,Aluminium, Plastics and other soft Non-Ferrous materials.

Chip Breaker: AL. Application: Med Cut.

VCGT Turning Inserts Grade K10

VCGT 160412-AL, Turning Insert, Grade K10, Carbide, 35° Rhombic

Fits the same Internal/External Toolholders as VCGT

Insert Geometry for Finishing & Semi-finishing of Aluminium & Aluminium Alloys
Optimised edge and radius geometry.
Improved surface finish.
Improved chip control.
'G' Tolerance for high repeatability.
First choice for machining pure aluminium.
30% longer insert life compared to uncoated grade.

Grade K10C
ISO N05-N15 PVD Coated. Micrograin carbide for machining aluminium and aluminium alloys, 30% higher tool life against uncoated grade. Smooth coating and polished surface gives better chip control.

ALC Geometry 
For finishing & semi finishing of aluminium and aluminium alloys. A unique breaker design gives a sharp cutting edge and positive rake angle. Special edge preparation and surface treatment produce better surface quality and greater chip control, reduced friction and vibration. 'G' tolerance inserts for higher repeatability.

VCGX Turning Inserts 

35° Rhombic Insert

Fits the same Internal/External Toolholders as VCGT

Insert Geometry for Finishing & Semi-finishing of Aluminium & Aluminium Alloys
Optimised edge and radius geometry.
Improved surface finish.
Improved chip control.
'G' Tolerance for high repeatability.
First choice for machining pure aluminium.
30% longer insert life compared to uncoated grade.

Insert Grade K10C
ISO N05-N15 PVD Coated. Micrograin carbide for machining aluminium and aluminium alloys, 30% higher tool life against uncoated grade. Smooth coating and polished surface gives better chip control.

ALC Geometry 
For finishing & semi finishing of aluminium and aluminium alloys. A unique breaker design gives a sharp cutting edge and positive rake angle. Special edge preparation and surface treatment produce better surface quality and greater chip control, reduced friction and vibration. 'G' tolerance inserts for higher repeatability.

VCGX Turning Inserts Grade K10C

VCGX 110302-ALC, Turning Insert, Grade K10C, Carbide, 35° Rhombic

VCGX 110304-ALC, Turning Insert, Grade K10C, Carbide, 35° Rhombic

VNMG Turning Inserts

35° Rhombic Insert

Insert Grades QX530  
(ISO P20-P40 M20-M30) Coated. Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.


Chip Breaker: NFI. Application: Finish.


VNMG Turning Inserts Grade QX530

VNMG 12T302-NF1, Turning Insert, Grade QX530, Carbide, 35° Rhombic

Grade:
QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.

WNMA Turning Inserts

80° Trigon Insert

Insert Grade QX505
(ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.

Next Day Delivery

across the UK*

New

Products

Best Prices

with a Trade Account

Turning Inserts

Yamaloy

CCGX 060202-ALC, Turning Insert, Grade K10C, Carbide, 80° Rhombic

5 Variations

Yamaloy

CCMT 060204-PM, Turning Insert, Grade QX500, Cermet, 80° Rhombic

4 Variations

Yamaloy

DCGT 11T304-AL, Turning Insert, Grade K10, Carbide, 55° Rhombic

5 Variations

Yamaloy

DCGX 11T304-ALC, Turning Insert, Grade K10C, Carbide, 55° Rhombic

2 Variations

Yamaloy

DNMG 150408-NF3, Turning Insert, Grade QX520, Carbide, 55° Rhombic

2 Variations

Yamaloy

DNMG 150408-NR8, Turning Insert, Grade QX520, Carbide, 55° Rhombic

2 Variations

Yamaloy

TCGT 16T304-AL, Turning Insert, Grade K10, Carbide, Triangle

4 Variations

Yamaloy

TCGT 16T308-AL, Turning Insert, Grade K10, Carbide, Triangle

4 Variations

Yamaloy

TCGT 16T304-PF, Turning Insert, Grade QX5020, Carbide, Triangle

Yamaloy

TNMG 220408-NM6, Turning Insert, Grade QX5030, Carbide, Triangle

5 Variations

Yamaloy

VCGT 160412-AL, Turning Insert, Grade K10, Carbide, 35° Rhombic

5 Variations

Yamaloy

VCGX 110302-ALC, Turning Insert, Grade K10C, Carbide, 35° Rhombic

3 Variations

Yamaloy

VCGX 110304-ALC, Turning Insert, Grade K10C, Carbide, 35° Rhombic

3 Variations

Yamaloy

VNMG 12T302-NF1, Turning Insert, Grade QX530, Carbide, 35° Rhombic

2 Variations

Yamaloy

WNMA 080408, Turning Insert, Carbide, Trigon, Coated, Grade QX505

Key Information

Policies

© 2024 Cromwell. All rights reserved.